Raymarine 420D manual Operation

Page 34

Select PLACE WPT AT VESSEL.

A new waypoint is placed at the vessel’s current position.

Chapter 3: Operation	3-3

PLACE

WAYPOINT

MOVE CURSOR, "ENTER"TO PLACE

WAYPOINT, "CLEAR" TO QUIT

2.Place the cursor in the required position on the chart and press ENTER to place the waypoint. The waypoint is added to the waypoint list and named using the next available number.

The waypoint functions remain displayed so that you can place further waypoints.

If required, use EDIT WAYPOINT to name the waypoint as described in Editing Waypoints below.

3.When finished placing waypoints, press CLEAR.

To place a waypoint at the vessel’s position:

‰1.

To place a waypoint using the Waypoint List:

‰1. Select WAYPOINT LIST . The Waypoint List and associated functions are displayed:

2.Select MAKE NEW WAYPOINT.

The waypoint is placed at the current vessel position or, if a GPS fix is not available, the cursor position. The new waypoint is added to the Waypoint List and named with the next available number.

To return to chart mode, press CLEAR twice.

Image 34

Contents Distributed by Raychart 420/ 420D Chartplotter Page RayChart 420 and 420D Chartplotter Owner’s Handbook Safety NoticesUnited States Preface WarrantyEMC Conformance RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D Introduction OverviewHow this Handbook is organised General Chartplotter displayDisplay functions Operating controls Display optionsTrackpad and cursor 128 nmDedicated keys Function barPop-up menus Database listsConventions used Getting startedSimulator Switching on/off Chart simulator Selecting the display mode Controlling the displayTime 1234 Date 26/01/99 Moving around the chart Using Find ShipChanging the chart scale Status Bar Chart rangeUsing Navionics Nav-Chart cards 128 nmInserting a Nav-Chart card Displaying the chart data Removing a Nav-Chart cardDisplaying chart information To obtain port services information RayChart 420/420D Chartplotter Working with waypoints SafetyOperation IntroductionPlacing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Erasing a waypoint Moving a waypointWorking with routes Creating a new route Saving the Current Route Clearing the current route from the screen Retrieving a route from the databaseErasing or renaming a route Displaying route leg and waypoint informationEditing a route Inserting/deleting waypoints in a route To add a waypoint to the end of a routeFollowing routes and going to target points Follow a route Reverse a routeAlter a route Target point arrivalJoin a route Restart Cross Track Error XTE Advance to a waypointGoing to an individual target Go to a waypointGo to cursor Go to a portChanging the display mode Stop follow or stop gotoCDI display BDI display BRG 234 T RNG 12.4 nm Waypoint dataCOG 230 T SOG 6.8 Kts Navigation dataTime Date 26/01/99 Time/Date DataDisplayed waypoints Transferring waypoints and routesManaging database lists Using tracks WPT/ROUTE TransferSetting up a track SettingClearing the current track Man Overboard MOBSmartRoute‰ Alarms Range key operates normally to change chart scaleSetting up the chartplotter System set up parametersMenu Options Factory New Default Setting Units Bearing modeKey beep VariationSimulated SOG Time offsetLanguage Simulated COGChart set up parameters Parameter Options Factory New Default Setting Orientation Plotter modeWaypoint symbol Show waypointsChart text Anchor alarmXTE alarm Screen amplifierDepth contours 10M Chart boundariesDepth contours 5M Depth contours 20MGPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter Installation EMC Installation GuidelinesSuppression ferrites Unpacking and inspecting the componentsConnections to other equipment Registering this Product LocationItems Missing? Selecting the best location122 mm 4.8 Trunnion yoke mounting Connecting to other equipmentMounting the chartplotter Panel mountingD47221 GPS connector Chartplotter connectorsCabling POWER/NMEA connector System Check and Initial Switch On Function ColorInitial Switch On System CheckChecking the Chartplotter Operation RayChart 420/420D Chartplotter Servicing and Safety Maintenance & fault findingMaintenance Routine checksResetting the system Two types of reset are available for the ChartplotterProblem solving Fault findingFor product repair and service How to contact Raytheon Marine USFor accessories and parts Worldwide supportHow to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Appendix a Specification Y2KRayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 Appendix C List of abbreviations COGRayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Limited Warranty Certificate Warranty LimitationsFactory Service Centers United States of America