Raymarine 420D Clearing the current route from the screen, Retrieving a route from the database

Chapter 3: Operation 3-11

5.Press ENTER to finish and clear the Route List, then press CLEAR to return to the chart mode.

Clearing the current route from the screen

To clear the current route from the screen, select CLEAR ROUTE. If the current route has not been saved, you are prompted to save it.

To clear the current route from the screen:

‰1. Select ROUTES or place the cursor over a route leg until the leg data is displayed in the Status Bar.

2.Select CLEAR ROUTE and press ENTER to clear the route or press CLEAR to cancel the operation.

3.If the route has not been saved, a prompt gives the options ENTER to save or CLEAR to remove the route from the screen.

4.To save the route in the database, press ENTER. The Name Route functions are displayed , see Saving the Current Route above.

Retrieving a route from the database

You can select a route as the current route from the database list. The list is accessed from the second set of ROUTES functions.

To select a route as the current route:

‰1. Select ROUTES, followed by MORE, then ROUTE LIST. The route list is displayed with the currently selected route highlighted:

2.Select SHOW ROUTE. The route list is removed and the selected route is shown on screen as the current route.