Raymarine 420D manual BRG 234 T RNG 12.4 nm, Waypoint data

Page 54

Chapter 3: Operation	3-23

Waypoint data

The Waypoint Data display comprises text data occupying the whole screen :

ROUTE

ROUTE 01

WAYPOINT

WPT 001

BRG 234° T

RNG 12.4 nm

COG	230°	T	TIME	13:29	12/12/99
SOG	6.8	Kts	TTG	01:03
XTE	0.5	nm	ETA	14:32	12/12/99

STEER STARBOARD

D4702_1

If a route is not selected, the ROUTE field displays NO ROUTE.

The WAYPOINT field shows the name of the waypoint. If the waypoint is part of a route then the title field includes the waypoint index in the route. If there is no target waypoint the text indicates NO WAYPOINT and all waypoint data is shown as dashes, one per character. If a route is being followed and the waypoint is not named, the text shows the waypoint number within the route (as displayed on screen). If a GOTO Cursor or Port is in progress, the text indicates GOTO CURSOR or GOTO ‘Port Name’.

BRG, RNG and XTE data relate to the target waypoint.

The Time refers to local time and is set in the System Set Up menu, Chapter 4.

The Time To Go (TTG) and Estimated Time of Arrival (ETA) data relate to the target waypoint (not the whole route) and are based on the Speed Over Ground (SOG) towards the target. If the VMG is negative, or data is not available, these fields are replaced by dashes, one per character.

The steering instruction is STEER STARBOARD if the XTE is 0.01nm or more to port, STEER PORT if the XTE is 0.01nm or more to starboard or ON COURSE if XTE is less than 0.01 on either side.

Image 54

Contents Distributed by Raychart 420/ 420D Chartplotter Page RayChart 420 and 420D Chartplotter Owner’s Handbook Safety NoticesUnited States Warranty PrefaceEMC Conformance RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D Overview IntroductionHow this Handbook is organised Chartplotter display GeneralDisplay functions Operating controls Display optionsTrackpad and cursor 128 nmDedicated keys Function barPop-up menus Database listsGetting started Conventions usedSimulator Switching on/off Chart simulator Selecting the display mode Controlling the displayTime 1234 Date 26/01/99 Moving around the chart Using Find ShipChanging the chart scale Status Bar Chart rangeUsing Navionics Nav-Chart cards 128 nmInserting a Nav-Chart card Removing a Nav-Chart card Displaying the chart dataDisplaying chart information To obtain port services information RayChart 420/420D Chartplotter Working with waypoints SafetyOperation IntroductionPlacing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Erasing a waypoint Moving a waypointWorking with routes Creating a new route Saving the Current Route Clearing the current route from the screen Retrieving a route from the databaseDisplaying route leg and waypoint information Erasing or renaming a routeEditing a route Inserting/deleting waypoints in a route To add a waypoint to the end of a routeFollowing routes and going to target points Follow a route Reverse a routeTarget point arrival Alter a routeJoin a route Restart Cross Track Error XTE Advance to a waypointGoing to an individual target Go to a waypointGo to cursor Go to a portChanging the display mode Stop follow or stop gotoCDI display BDI display BRG 234 T RNG 12.4 nm Waypoint dataCOG 230 T SOG 6.8 Kts Navigation dataTime Date 26/01/99 Time/Date DataTransferring waypoints and routes Displayed waypointsManaging database lists Using tracks WPT/ROUTE TransferSetting up a track SettingMan Overboard MOB Clearing the current trackSmartRoute‰ Alarms Range key operates normally to change chart scaleSetting up the chartplotter System set up parametersMenu Options Factory New Default Setting Units Bearing modeKey beep VariationSimulated SOG Time offsetLanguage Simulated COGChart set up parameters Parameter Options Factory New Default Setting Orientation Plotter modeWaypoint symbol Show waypointsChart text Anchor alarmXTE alarm Screen amplifierDepth contours 10M Chart boundariesDepth contours 5M Depth contours 20MGPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter Installation EMC Installation GuidelinesUnpacking and inspecting the components Suppression ferritesConnections to other equipment Registering this Product LocationItems Missing? Selecting the best location122 mm 4.8 Trunnion yoke mounting Connecting to other equipmentMounting the chartplotter Panel mountingD47221 Chartplotter connectors GPS connectorCabling POWER/NMEA connector System Check and Initial Switch On Function ColorInitial Switch On System CheckChecking the Chartplotter Operation RayChart 420/420D Chartplotter Servicing and Safety Maintenance & fault findingMaintenance Routine checksResetting the system Two types of reset are available for the ChartplotterProblem solving Fault findingFor product repair and service How to contact Raytheon Marine USFor accessories and parts Worldwide supportHow to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Appendix a Specification Y2KRayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 Appendix C List of abbreviations COGRayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Limited Warranty Certificate Warranty LimitationsFactory Service Centers United States of America