Raymarine 420D manual Advance to a waypoint, Restart Cross Track Error XTE

Page 48

Chapter 3: Operation	3-17

2. Press ENTER and select FOLLOW FROM HERE.

FOLLOW		EDIT		REMOVE		MOVE
FROM HERE		WAYPOINT		WAYPOINT		WAYPOINT
						D4687_1

Your vessel follows the route, using the selected waypoint as the target.

3.To return to chart mode, move the cursor away from the waypoint or press

CLEAR.

Advance to a waypoint

When following a route you can advance to the next waypoint, even if you have not reached the current target waypoint.

To advance to a waypoint:

‰	1.		Press the GOTO key to display the Goto/Follow functions:

			STOP		RESTART		WAYPOINT
			FOLLOW		XTE		ADVANCE
								D4688_1
	2.		Select WAYPOINT ADVANCE. The current leg of the route is abandoned
			and the next waypoint becomes the target. The display is updated to show
			the new route leg.

Restart Cross Track Error (XTE)

Reset XTE is useful if you find yourself off track and want to go straight to your target, rather than get back onto the original track.

Whilst following a route, or going to a target point, you can restart the XTE. This sets the XTE to zero and moves the origin to the vessel’s actual position.

To restart XTE:

1. Press the GOTO key.

If following a route, the following functions are displayed:

‰	STOP		RESTART		WAYPOINT
	FOLLOW		XTE		ADVANCE
						D4688_1
	If a GOTO is already in progress, the following functions are displayed:
	STOP		RESTART
	GOTO		XTE
						D4689_1

2.Select RESTART XTE. The dotted line between the previous and next waypoints is redrawn from the vessel’s current position to the next waypoint and the XTE is reset to zero

Image 48

Contents Distributed by Raychart 420/ 420D Chartplotter Page RayChart 420 and 420D Chartplotter Owner’s Handbook Safety NoticesUnited States Warranty PrefaceEMC Conformance RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D Overview IntroductionHow this Handbook is organised Chartplotter display GeneralDisplay functions Operating controls Display optionsTrackpad and cursor 128 nmDedicated keys Function barPop-up menus Database listsGetting started Conventions usedSimulator Switching on/off Chart simulator Selecting the display mode Controlling the displayTime 1234 Date 26/01/99 Moving around the chart Using Find ShipChanging the chart scale Status Bar Chart rangeUsing Navionics Nav-Chart cards 128 nmInserting a Nav-Chart card Removing a Nav-Chart card Displaying the chart dataDisplaying chart information To obtain port services information RayChart 420/420D Chartplotter Safety OperationWorking with waypoints IntroductionPlacing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Erasing a waypoint Moving a waypointWorking with routes Creating a new route Saving the Current Route Clearing the current route from the screen Retrieving a route from the databaseDisplaying route leg and waypoint information Erasing or renaming a routeEditing a route Inserting/deleting waypoints in a route To add a waypoint to the end of a routeFollowing routes and going to target points Follow a route Reverse a routeTarget point arrival Alter a routeJoin a route Restart Cross Track Error XTE Advance to a waypointGoing to an individual target Go to a waypointGo to cursor Go to a portChanging the display mode Stop follow or stop gotoCDI display BDI display BRG 234 T RNG 12.4 nm Waypoint dataCOG 230 T SOG 6.8 Kts Navigation dataTime Date 26/01/99 Time/Date DataTransferring waypoints and routes Displayed waypointsManaging database lists Using tracks WPT/ROUTE TransferSetting up a track SettingMan Overboard MOB Clearing the current trackSmartRoute‰ Alarms Range key operates normally to change chart scaleSetting up the chartplotter System set up parametersMenu Options Factory New Default Setting Bearing mode Key beepUnits VariationTime offset LanguageSimulated SOG Simulated COGChart set up parameters Parameter Options Factory New Default Setting Plotter mode Waypoint symbolOrientation Show waypointsAnchor alarm XTE alarmChart text Screen amplifierChart boundaries Depth contours 5MDepth contours 10M Depth contours 20MGPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter Installation EMC Installation GuidelinesUnpacking and inspecting the components Suppression ferritesConnections to other equipment Location Items Missing?Registering this Product Selecting the best location122 mm 4.8 Connecting to other equipment Mounting the chartplotterTrunnion yoke mounting Panel mountingD47221 Chartplotter connectors GPS connectorCabling POWER/NMEA connector System Check and Initial Switch On Function ColorInitial Switch On System CheckChecking the Chartplotter Operation RayChart 420/420D Chartplotter Maintenance & fault finding MaintenanceServicing and Safety Routine checksResetting the system Two types of reset are available for the ChartplotterProblem solving Fault findingHow to contact Raytheon Marine US For accessories and partsFor product repair and service Worldwide supportHow to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Appendix a Specification Y2KRayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 Appendix C List of abbreviations COGRayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Limited Warranty Certificate Warranty LimitationsFactory Service Centers United States of America