Raymarine 420D manual Enter

Page 37

3-6	RayChart 420/420D Chartplotter

4. To edit the symbol, select EDIT SYMBOL.

D4674_1

5.Use trackpad left/right to highlight the required symbol , then press

ENTER.

To edit a waypoint using the Waypoint List:

‰1. From chart mode, press ENTER; the primary function bar is displayed.

2.Using trackpad left/right, select WAYPOINTS.

3.Select WAYPOINT LIST.

The Waypoint List is displayed, with its associated function bar:

4.Select EDIT WAYPOINT; the waypoint edit functions are displayed:

5.To edit the waypoint name, select EDIT NAME.

The cursor is placed in the name field of the selected waypoint. Edit the name as previously described (up to eight characters).

6.Edit the waypoint symbol as previously described, using the cursor.

7.To change the waypoint’s position, select EDIT POSITION. The cursor is placed in the Position field in the Waypoint List .

•Use trackpad left/right to select the latitude/longitude fields.

•Use trackpad up/down to scroll through and edit the values.

8.When you have finished editing, press ENTER to save the new position.

Image 37

Contents Distributed by Raychart 420/ 420D Chartplotter Page Safety Notices RayChart 420 and 420D Chartplotter Owner’s HandbookUnited States Preface WarrantyEMC Conformance RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D Introduction OverviewHow this Handbook is organised General Chartplotter displayDisplay functions Display options Operating controls128 nm Trackpad and cursorFunction bar Dedicated keysDatabase lists Pop-up menusConventions used Getting startedSimulator Switching on/off Chart simulator Controlling the display Selecting the display modeTime 1234 Date 26/01/99 Using Find Ship Moving around the chartStatus Bar Chart range Changing the chart scale128 nm Using Navionics Nav-Chart cardsInserting a Nav-Chart card Displaying the chart data Removing a Nav-Chart cardDisplaying chart information To obtain port services information RayChart 420/420D Chartplotter Operation SafetyWorking with waypoints IntroductionPlacing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Moving a waypoint Erasing a waypointWorking with routes Creating a new route Saving the Current Route Retrieving a route from the database Clearing the current route from the screenErasing or renaming a route Displaying route leg and waypoint informationEditing a route To add a waypoint to the end of a route Inserting/deleting waypoints in a routeFollowing routes and going to target points Reverse a route Follow a routeAlter a route Target point arrivalJoin a route Advance to a waypoint Restart Cross Track Error XTEGo to a waypoint Going to an individual targetGo to a port Go to cursorStop follow or stop goto Changing the display modeCDI display BDI display Waypoint data BRG 234 T RNG 12.4 nmNavigation data COG 230 T SOG 6.8 KtsTime/Date Data Time Date 26/01/99Displayed waypoints Transferring waypoints and routesManaging database lists WPT/ROUTE Transfer Using tracksSetting Setting up a trackClearing the current track Man Overboard MOBSmartRoute‰ Range key operates normally to change chart scale AlarmsSystem set up parameters Setting up the chartplotterMenu Options Factory New Default Setting Key beep Bearing modeUnits VariationLanguage Time offsetSimulated SOG Simulated COGChart set up parameters Parameter Options Factory New Default Setting Waypoint symbol Plotter modeOrientation Show waypointsXTE alarm Anchor alarmChart text Screen amplifierDepth contours 5M Chart boundariesDepth contours 10M Depth contours 20MGPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter EMC Installation Guidelines InstallationSuppression ferrites Unpacking and inspecting the componentsConnections to other equipment Items Missing? LocationRegistering this Product Selecting the best location122 mm 4.8 Mounting the chartplotter Connecting to other equipmentTrunnion yoke mounting Panel mountingD47221 GPS connector Chartplotter connectorsCabling POWER/NMEA connector Function Color System Check and Initial Switch OnSystem Check Initial Switch OnChecking the Chartplotter Operation RayChart 420/420D Chartplotter Maintenance Maintenance & fault findingServicing and Safety Routine checksTwo types of reset are available for the Chartplotter Resetting the systemFault finding Problem solvingFor accessories and parts How to contact Raytheon Marine USFor product repair and service Worldwide supportHow to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Y2K Appendix a SpecificationRayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 COG Appendix C List of abbreviationsRayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Warranty Limitations Limited Warranty CertificateUnited States of America Factory Service Centers