Raymarine 420 Transferring waypoints and routes, Displayed waypoints, Managing database lists

Page 57

3-26	RayChart 420/420D Chartplotter

3.6 Transferring waypoints and routes

Displayed waypoints

Waypoints and routes can be received and transmitted via NMEA, see also Chapter 5, Section 5.4, Connecting to other equipment. The NMEA link could be to a PC.

Managing database lists

The SEND WAYPOINTS function sends all waypoints in the Waypoint List and all routes in the Route List. Sending the Waypoint List does not affect current routes.

Note: Sending the Waypoint List includes waypoints in an unsaved route.

The RECEIVE WAYPOINTS function adds waypoints and routes received via NMEA to the Waypoint List and Route List.

Note: Where multiple waypoints have the same position, the last waypoint sent is the only one included in the Waypoint List.

To send waypoints (and route lists):

‰1. From chart mode, press ENTER; the primary function bar is displayed:

2.Using trackpad up/down, select WAYPOINTS.

3.Select WAYPOINT LIST.

The Waypoint List is displayed, with its associated function bar:

4.Initiate receiving of waypoints on the NMEA compatible equipment.

5.Select WPT/ROUTE TRANSFER.

The waypoint transfer functions are displayed:

6.Select SEND WAYPOINTS and press ENTER; the text changes to

STOP SENDING.

Image 57

Contents Distributed by Raychart 420/ 420D Chartplotter Page Safety Notices RayChart 420 and 420D Chartplotter Owner’s HandbookUnited States Warranty PrefaceEMC Conformance RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D Overview IntroductionHow this Handbook is organised Chartplotter display GeneralDisplay functions Display options Operating controls128 nm Trackpad and cursorFunction bar Dedicated keysDatabase lists Pop-up menusGetting started Conventions usedSimulator Switching on/off Chart simulator Controlling the display Selecting the display modeTime 1234 Date 26/01/99 Using Find Ship Moving around the chartStatus Bar Chart range Changing the chart scale128 nm Using Navionics Nav-Chart cardsInserting a Nav-Chart card Removing a Nav-Chart card Displaying the chart dataDisplaying chart information To obtain port services information RayChart 420/420D Chartplotter Operation SafetyWorking with waypoints IntroductionPlacing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Moving a waypoint Erasing a waypointWorking with routes Creating a new route Saving the Current Route Retrieving a route from the database Clearing the current route from the screenDisplaying route leg and waypoint information Erasing or renaming a routeEditing a route To add a waypoint to the end of a route Inserting/deleting waypoints in a routeFollowing routes and going to target points Reverse a route Follow a routeTarget point arrival Alter a routeJoin a route Advance to a waypoint Restart Cross Track Error XTEGo to a waypoint Going to an individual targetGo to a port Go to cursorStop follow or stop goto Changing the display modeCDI display BDI display Waypoint data BRG 234 T RNG 12.4 nmNavigation data COG 230 T SOG 6.8 KtsTime/Date Data Time Date 26/01/99Transferring waypoints and routes Displayed waypointsManaging database lists WPT/ROUTE Transfer Using tracksSetting Setting up a trackMan Overboard MOB Clearing the current trackSmartRoute‰ Range key operates normally to change chart scale AlarmsSystem set up parameters Setting up the chartplotterMenu Options Factory New Default Setting Key beep Bearing modeUnits VariationLanguage Time offsetSimulated SOG Simulated COGChart set up parameters Parameter Options Factory New Default Setting Waypoint symbol Plotter modeOrientation Show waypointsXTE alarm Anchor alarmChart text Screen amplifierDepth contours 5M Chart boundariesDepth contours 10M Depth contours 20MGPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter EMC Installation Guidelines InstallationUnpacking and inspecting the components Suppression ferritesConnections to other equipment Items Missing? LocationRegistering this Product Selecting the best location122 mm 4.8 Mounting the chartplotter Connecting to other equipmentTrunnion yoke mounting Panel mountingD47221 Chartplotter connectors GPS connectorCabling POWER/NMEA connector Function Color System Check and Initial Switch OnSystem Check Initial Switch OnChecking the Chartplotter Operation RayChart 420/420D Chartplotter Maintenance Maintenance & fault findingServicing and Safety Routine checksTwo types of reset are available for the Chartplotter Resetting the systemFault finding Problem solvingFor accessories and parts How to contact Raytheon Marine USFor product repair and service Worldwide supportHow to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Y2K Appendix a SpecificationRayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 COG Appendix C List of abbreviationsRayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Warranty Limitations Limited Warranty CertificateUnited States of America Factory Service Centers