Raymarine 420D manual Operating controls, Display options

Page 16

Chapter 1: Overview	1-3

The chartplotter screen can also show additional information, depending on your currently selected options, set up selections and data available from other equipment.

An example chart display in its default configuration, with a chart card installed, is shown in Section 1.3, Operating controls.

Several functions are available to control the display as follows:

•Zoom in/out

•Pan the Display.

•Centre the Chart around the Vessel.

Operation of these functions is described in Chapter 2.

Display options

Display options are selected in System Set Up and Chart Set Up as described in Chapter 4.

1.3 Operating controls

The chartplotter is operated by means of the following controls:

•A trackpad providing up, down, left, right and diagonal control of an on- screen cursor.

•Six dedicated push-button (labelled) keys.

•Pop-up menus, displayed on-screen, from which you select options.

•Database lists, displayed on-screen, which enable you to edit items.

Note: The cursor is the cross-hair symbol (+) visible on the display. You move the cursor with the trackpad and use it to select a position or item on the chart.

The controls are shown in the following illustration. They are back-lit for night- time use.

The following paragraphs describe the controls and on-screen facilities.

Image 16

Contents Distributed by Raychart 420/ 420D Chartplotter Page RayChart 420 and 420D Chartplotter Owner’s Handbook Safety NoticesUnited States Preface WarrantyEMC Conformance RayChart 420/420D Chartplotter Contents Join a route Advance to a waypoint Table of Contents Vii For accessories and parts Table of Contents RayChart 420/420D Introduction OverviewHow this Handbook is organised General Chartplotter displayDisplay functions Operating controls Display optionsTrackpad and cursor 128 nmDedicated keys Function barPop-up menus Database listsConventions used Getting startedSimulator Switching on/off Chart simulator Selecting the display mode Controlling the displayTime 1234 Date 26/01/99 Moving around the chart Using Find ShipChanging the chart scale Status Bar Chart rangeUsing Navionics Nav-Chart cards 128 nmInserting a Nav-Chart card Displaying the chart data Removing a Nav-Chart cardDisplaying chart information To obtain port services information RayChart 420/420D Chartplotter Safety OperationWorking with waypoints IntroductionPlacing a waypoint Operation Selecting a waypoint Editing the waypoint details Enter Erasing a waypoint Moving a waypointWorking with routes Creating a new route Saving the Current Route Clearing the current route from the screen Retrieving a route from the databaseErasing or renaming a route Displaying route leg and waypoint informationEditing a route Inserting/deleting waypoints in a route To add a waypoint to the end of a routeFollowing routes and going to target points Follow a route Reverse a routeAlter a route Target point arrivalJoin a route Restart Cross Track Error XTE Advance to a waypointGoing to an individual target Go to a waypointGo to cursor Go to a portChanging the display mode Stop follow or stop gotoCDI display BDI display BRG 234 T RNG 12.4 nm Waypoint dataCOG 230 T SOG 6.8 Kts Navigation dataTime Date 26/01/99 Time/Date DataDisplayed waypoints Transferring waypoints and routesManaging database lists Using tracks WPT/ROUTE TransferSetting up a track SettingClearing the current track Man Overboard MOBSmartRoute‰ Alarms Range key operates normally to change chart scaleSetting up the chartplotter System set up parametersMenu Options Factory New Default Setting Bearing mode Key beepUnits VariationTime offset LanguageSimulated SOG Simulated COGChart set up parameters Parameter Options Factory New Default Setting Plotter mode Waypoint symbolOrientation Show waypointsAnchor alarm XTE alarmChart text Screen amplifierChart boundaries Depth contours 5MDepth contours 10M Depth contours 20MGPS setup Setting Up the Chartplotter RayChart 420/420D Chartplotter Installation EMC Installation GuidelinesSuppression ferrites Unpacking and inspecting the componentsConnections to other equipment Location Items Missing?Registering this Product Selecting the best location122 mm 4.8 Connecting to other equipment Mounting the chartplotterTrunnion yoke mounting Panel mountingD47221 GPS connector Chartplotter connectorsCabling POWER/NMEA connector System Check and Initial Switch On Function ColorInitial Switch On System CheckChecking the Chartplotter Operation RayChart 420/420D Chartplotter Maintenance & fault finding MaintenanceServicing and Safety Routine checksResetting the system Two types of reset are available for the ChartplotterProblem solving Fault findingHow to contact Raytheon Marine US For accessories and partsFor product repair and service Worldwide supportHow to contact Raytheon Marine Europe RayChart 420/420D Chartplotter Appendix a Specification Y2KRayChart 420/420D Chartplotter Appendix B Nmea data RayChart420 Appendix C List of abbreviations COGRayChart 420/420D Chartplotter Cut out Shaded area Only RayChart Limited Warranty Certificate Warranty LimitationsFactory Service Centers United States of America