Lexicon MPX 550 manual Basic Operation, Selecting and Loading Programs

Basic Operation

Lexicon

SELECTING AND LOADING PROGRAMS

When powered on, the unit will load the last program that was loaded during the previous operating session. To select another program, turn the front panel PROGRAM knob.

When the PROGRAM knob is turned clockwise, the unit will cycle forward through programs in the selected bank, then proceed to cycle forward through programs in the next bank. When turned counterclockwise, the unit will cycle backward through programs in the selected bank, then proceed to cycle backward through programs in the previous bank. When the PROGRAM knob is pushed inward and turned, the unit will cycle through program banks.

The name and number of the selected program appear on the front panel display (see page 1-6). The

Load LED will light to indicate that the selected program is cued for loading. After 4 seconds,

the front panel display will revert to showing the name and number of the loaded program. However, the Load LED will remain lit to indicate that the selected program is still cued for loading. The number of the cued program will appear in inverse video below the number of the currently loaded program. To load the cued program, press the front panel Load button.

The unit can be configured to automatically load programs 3/4 second after the PROGRAM knob stops turning. To do this, set the System Mode parameter Auto Load to Enabled (see page 3-7).

Turn the PROGRAM knob clockwise to	Turn the PROGRAM knob counterclockwise to	Press and turn the PROGRAM knob to
cycle forward through all programs.	cycle backward through all programs.	select a program bank.

2-2