Lexicon MPX 550 manual Gate/Inv Programs Adjust Tap

MPX 550

Program Descriptions

GATE/INV

Gated reverbs were created by feeding a reverb, such as a metal plate, through an analog gate device. Decay time was set to instant, while hold time varied duration and sound.

The Gate programs provide a fairly constant sound with no decay until the reverb is cut off abruptly. These programs work well on percussion, particularly on snare and toms. It is recommended to experiment with other sound sources as well.

Note:

Adjusting the Time or Duration parameters will cause the selected program to reload. The System Mode parameter Program Load Mode determines whether the system will mute or bypass during program load.

Gate/Inv Programs		"Adjust"	Tap
10	StraightGate	(Time)	–
11	Slope Down	(Time)	–
12	Drum Gate	(HighCut)	PreDelay
			(1/32 Note)
13	140ms,TapPre	(HighCut)	PreDelay
			(1/32 Note)
14	240ms,TapPre	(HighCut)	PreDelay
			(1/32 Note)
15	340ms,TapPre	(HighCut)	PreDelay
			(1/32 Note)
16	440ms,TapPre	(HighCut)	PreDelay
			(1/32 Note)
17	540ms,TapPre	(HighCut)	PreDelay
			(1/32 Note)
18	Inverse	(Time)	–
19	Dark Inverse	(Time)	–

4-3