Lexicon MPX 550 Memory Protect Enabled, Disabled, Auto Load Enabled, Disabled, Display Brightness

MPX 550

System Mode

•The front panel PROGRAM knob is still available for selecting user programs only. Programs stored in the User Bank are still available, but cannot be modified.

•The System Mode parameter Auto Load is set to Enabled.

•Bypass functions are still available.

•Tempo and Patches cannot be learned.

•System Mode can still be activated.

Changes to the Operating Mode parameter will not take effect until the unit has been powered off, then powered on again.

Memory Protect (Enabled, Disabled)

Protects the User Bank from accidental changes. When set to Enabled, the unit prevents changes to the User Bank. However, it does not prevent changes to System Mode parameters, nor does it prevent the restoration of factory-default settings. Restoring default settings will still erase all programs stored in the User Bank. When set to Disabled, the unit does not prevent changes to the User Bank.

Auto Load (Enabled, Disabled)

Determines whether the front panel Load button must be pressed to load selected programs. When set to Enabled, programs will automatically load 3/4 second after the PROGRAM knob stops turning. When set to Disabled, programs will not load until the Load button is pressed.

Display Brightness

Controls the brightness of the front panel display. Turn EDIT knob 3 clockwise to make the display darker, and counterclockwise to make the display brighter.

3-7