MPX 550
Parameter Descriptions
R Dly 1, 2, 3 | (0ms to 5.060sec) |
Sets the delay time of right voice 1, 2, or 3. The Dly/Eko effect has three independent voices on each side.
Rate | (0 to 50.05Hz) |
RvbLvl | (off, |
In Ambience programs, controls the amount of "extra"
Controls modulation speeds.
Res 1, 2 |
In Chorus programs, control the amount of feedback signal.
Shape | (0 to 255) |
Controls the buildup of the early reflections that most audibly create the sound of a real room. Shape and Spread work together; if either is set to 0, the other has no effect.
Resonanc | Size | (4.0 to 76.0m) | ||
Sets the rate of echo density buildup after the initial | ||||
In Flange programs, controls the amount of feedback. | ||||
period (which is controlled by Diffusion). It also acts as a | ||||
|
| master control for Decay. Size changes a reverb sound | ||
Rt HC | (28Hz to 19.4kHz, off) | from very small to very large. It is recommended to set | ||
the Size control to the approximate size of the acoustic | ||||
Sets the frequency above which high frequencies are | ||||
space that is being created before adjusting other | ||||
rolled off in the reverberated signal, causing reverberated | parameters. The size in meters is roughly equal to the | |||
signals to grow progressively darker. This results in a | longest dimension of the space. (Adjusting the Size | |||
more natural sound because it simulates the effect of air | parameter causes the program to | |||
absorption in | a real hall. Setting this parameter to a |
|
|
low- frequency dampens the audio as it