Lexicon MPX 550 manual Program Change Messages Loading Programs, Midi Program Banks

MPX 550

MIDI Operation

PROGRAM CHANGE MESSAGES

LOADING PROGRAMS

Standard MIDI Program Change messages can be used to load all 255 presets and 64 user programs. The unit conforms to the use of MIDI Continuous Controller 32 to execute Bank Select messages. MPX 550 program banks are ordered numerically from 0 to 27, beginning with the Plate Bank. (See the table at the right for additional bank numbers.)

Any program can be loaded by selecting its bank with Controller 32, then sending the appropriate Program Change message.

For example, if the Plate Bank is selected:

•Sending Program Change 1 will load the first Plate program (Small Plate).

•Sending Controller 32 with a value of 27 followed by Program Change 1 will load the first program in the User Bank.

MIDI Program Banks

0	Plate	10	Detune	19	Pch-Rvb
1	Gate/Inv	11	Pitch	20	Chor-Rvb
2	Hall	12	Dly/Eko	21	MSplit Dly
3	Chamber	13	Special FX	22	MSplit Rvb
4	Ambience	14	Flng-Dly	23	Dual Mono
5	Room	15	Pch-Dly	24	Cmprssr
6	Tremolo	16	Chor-Dly	25	Dynamics
7	Rotary	17	Dly-Rvb	26	Live-FOH
8	Chorus	18	Flng-Rvb	27	User
9	Flange

•Sending Controller 32 with a value of 1 followed by Program Change 2 will load the second program (Slope Down) in the Gate/Inv Bank.

Once a bank is selected, all subsequent Program Change messages will select programs within that bank until a new value for Controller 32 is received, or until another program or bank is selected with the front panel PROGRAM knob.

MIDI Program Change messages can be disabled in System Mode with the MIDI Program Change parameter.

6-3