ClearOne comm AP400 operation manual Appendix D Accessories, Appendix E Serial Commands

Appendices ~ Appendix D: Accessories		43
Status outputs:	DB-25 female; open collector, 40V max, 300mA each
	(2) +5VDC, 300mA each 40V
Control inputs:	Input activation selectable; momentary or latching ground

Appendix D: Accessories

Accessory	ClearOne Part Number
AP800	910-150-001
AP10 Telephone Interface	910-150-201
Tabletop Omni Microphone	910-103-160 (with cable)
Tabletop Uni Microphone	910-103-161 (with cable)
Tabletop Omni Microphone	910-103-162 (black button)/
	910-103-163 (white button)
Tabletop Uni Microphone	910-103-164 (black button)/
	910-103-165 (white button)
Delta Microphone	910-103-340
Desktop Kit	860-150-002
Wall Mount Speaker	910-103-010

Appendix E: Serial Commands

The AP products accept serial commands through the AP400 serial port. The commands are then channeled along the G-Link network to all interconnected AP products. The commands provide the same control as the LCD menu structure, plus some additional controls. The following commands pertain only to the AP400.

RS-232 serial port protocol is 9,600 (default), 19,200, or 38,400 baud, 8 bits, 1 stop bit, no parity.

The AP400 accepts the commands outlined on page 45. The structure of serial commands is as follows:

Device ID, command, then any additional options in the order that they appear in the command descriptions on the following pages.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760