54
HOOKD
This command controls and reports the Hook Duration of the unit.
[DEVICE] HOOKD <X>
Explanation
<X>
X=1 | Parameter to set Hook Duration to 50ms |
X=2 | Parameter to set Hook Duration to 500ms |
X=Null | Parameter to report back the current state |
Return Values
The command returns the current hook duration of the unit in the same format as the command. If the sent command changes the hook duration of the unit, the updated hook duration is returned.
LFP
This command locks, unlocks, or returns the current state of the front panel from the serial port.
[DEVICE] LFP <X>
Explanation
<X>
X=0 | Parameter to unlock the front panel. |
X=1 | Parameter to lock the front panel |
X=2 | Parameter to toggle the state from one |
| state to the other (regardless of current |
| state) |
X=Null | Parameter to return the current state of the |
| front panel |
Appendices ~ Appendix E: Serial Commands
LMO
This command changes or reports back the setting of the last microphone on mode for each AP400.
[DEVICE] LMO <X>
Explanation
<X>
X=0 | Parameter to set the mode to OFF |
X=1 | Parameter to set the mode to Microphone |
| #1 |
X=2 | Parameter to set the mode to Last |
| Microphone On |
X=Null | Parameter to return the current mode |
Return Values
The command will return the updated mode for the selected AP400 in the same format as the command.
LVL
This command reports back the level for a given channel.
[DEVICE] LVL <CH> <W>
Explanation
<CH>
CH=
<W>
W= I Parameter to specify an input meter
W= O Parameter to specify an output meter
W= A Parameter to specify an adaptive ambient meter (channels
Return Values
The command will return the updated condition of the front panel.
Return Values
The command will return the input level of the channel in the same format as the command.