ClearOne comm AP400 operation manual Mute NLP, Device Mute CH W Device NLP CH, =Null

Appendices ~ Appendix E: Serial Commands	59
MUTE	NLP

This command changes or reports the state of mute for a given channel.

This command changes or reports back the state of the nonlinear processing for a microphone.

[DEVICE] MUTE <CH> <W> <X> DEVICE] NLP <CH> <X>

Explanation

<CH>

CH= 1-4 Parameter to apply to the specified microphone

	channel
CH= A-D, T Parameter to apply to select the line channel
CH= 1	Parameter to apply to select the subbus channel
CH= *	Parameter to apply to all microphone channels
<W>
W= S	Parameter to set subbus
W=I	Parameter to set input
W=O	Parameter to set output
<X>
X=0	Set mute to OFF
X=1	Set mute to ON (mute the selected channel)
X=2	Parameter to toggle the state from one state to
	the other (regardless of current state)
X=NULL	Report the current state of mute for the
	selected channel

Return Values

The command will return the mute status (On=1, Off=0) in the same format as the command.

Explanation

<CH>

CH= 1-4	Parameter to apply to the specified
	microphone channel
CH= *	Parameter to apply command to all
	microphone channels
<X>
X=0	Parameter to set the state to OFF
X=1	Parameter to set the state to soft
X=2	Parameter to set the state to medium
X=3	Parameter to set the state to aggressive
X=Null	Parameter to return the current state

Return Values

The command will return the updated condition (0=Off, 1=Soft, 2=Medium, 3=Aggressive) of the nonlinear processing in the same format as the command.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760