Return Values
The command will return the updated condition of the pin in the same format as the command. If the command did not alter the
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
COMMAND=Clear
COMMAND=Null
Pin will execute string when actuated
Parameter to return the current programming for the pin
Parameter to clear current programming (do nothing state)
COMMAND LIST: AA, AD, AGC, CHAIRO, EQ, GAIN, GMODE, HOOK, LFP, MUTE, NULL, PRESET, TE
Control pin 1 active Control pin 1 inactive Control pin 3 active Control pin 3 inactive Control pin 5 active Control pin 5 inactive Control pin 7 active Control pin 7 inactive Control pin 9 active Control pin 9 inactive Control pin 11 active Control pin 11 inactive Control pin 13 active Control pin 13 inactive Control pin 15 active Control pin 15 inactive
<LOCATION>
LOCATION=1
LOCATION=2
LOCATION=3
LOCATION=4
LOCATION=5
LOCATION=6
LOCATION=7
LOCATION=8
LOCATION=9
LOCATION=10
LOCATION=11
LOCATION=12
LOCATION=13
LOCATION=14
LOCATION=15
LOCATION=16
<COMMAND>
COMMAND=String
Appendices ~ Appendix E: Serial Commands
PCMD
This command programs or returns the program of the GPIO control pins from the serial port. COMMAND can be any valid command. These values are not part of the preset and do not change when presets are loaded.
[DEVICE] PCMD <LOCATION> <COMMAND>
Explanation
61
state, the command returns the current command for which the pin is programmed.
Example
The PCMD command line contains both the PCMD command and the command being programmed. To program AP400 unit 0 control/status pin 1 to toggle mute on mic 1, the command would appear as follows:
#30 PCMD 1 MUTE 1 I 2 | (toggles mute to the |
| opposite state: ON to |
| OFF and |