HAND HELD REMOTE OPERATIONS
1.Press the ON/OFF key on the transmitter, it controls all functions of the remote. The transmitter display will show all active icons on the screen. At the same time the receiver turns on the main burner and a single “beep” from the receiver will confi rm reception of the command.
2.Press the ON/OFF key on the transmitter. The transmitter LCD display will only show the room temperature and icon. At the same time the receiver will turn the burner off and the appliance burner turns off. A single “beep” from the receiver confi rms reception of the command.
FIGURE 58
TEMPERATURE DISPLAY
1.With the system in the “OFF” position, press the Thermostat Key and the Mode Key at the same time to change the temperature from Fahrenheit to Celsius.
2.Check the LCD screen on the Transmitter to verify that a C or F is visible to the right of the Room Temperature display.
With the thermostat in the off mode, the flame height may be chosen and the main burner left on, regardless of the room temperature. To turn off the flame, either turn off the on/off key or reduce fl ame height to the off position.
23
1.Press the Thermostat Key. The LCD display on the Transmitter
will show that the room is
“ON” and the set temperature is now displayed.
2.To adjust the set temperature, press the Up/Down Arrow Keys until the desired set temperature is displayed on the LCD screen of the Transmitter.
SMART THERMOSTAT
The Smart Thermostat function adjusts the fl ame height according to the difference between the set temperature and the actual room temperatures. As the room temperature gets closer to the set point the Smart Function will automatically adjust the fl ame down.
FIGURE 62
1.Press the thermostat key unit the word “SMART” appears to the right of the temperature bulb graphic.
2.To adjust the set temperature, press the Up/Down arrow keys until the desired set temperature is displayed on the LCD screen at the Transmitter.
FLAME HEIGHT
The remote control has six (6) fl ame levels. With the system on and the fl ame level at the maximum, press the Down Arrow Key once and it will reduce the fl ame height by one step until the fl ame is turned off.
The Up Arrow Key will increase the fl ame height each time it is pressed. If the Up Arrow Key is pressed while the system is on but the fl ame is off, the flame will come on the high position. A single “beep” will confi rm reception of the command.
FIGURE 59 | FIGURE 60 |
ROOM THERMOSTAT
The remote control can operate as a room thermostat. The thermostat can be set to a desired temperature to control the comfort level in the room.
FIGURE 61
FIGURE 63 | FIGURE 64 |
Flame OFF | Flame at level 1 |
FIGURE 65 | FIGURE 66 |
Flame at level fi ve | Flame at “HI” level six |