GENERAL INSTRUCTIONS
This gas fireplace should be installed and serviced by a qualified installer to conform with local codes. Installation practices vary from region to region and it is important to know the specifics that apply to your area,
for example: in Massachusetts State:
•The fireplace damper must be removed or welded in the open position prior to installation of a fireplace insert or gas log.
•The appliance off valve must be a “T” handle gas cock.
•The flexible connector must not be longer than 36 “.
•The appliance is not approved for installation in a bedroom or bathroom unless the unit is a direct vent sealed combustion product.
•A carbon monoxide detector is required in all rooms containing gas fired appliances.
•WARNING: This product must be installed by a licensed plumber or gas fitter when installed within the commonwealth of Massachusetts.
In absence of local codes, install to the current CAN/CGA
The fireplace and its individual shutoff valve must be discon- nected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa). The fireplace must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).
When the fireplace is installed directly on carpeting, vinyl tile or other combustible material other than wood flooring, the fireplace shall be installed on a metal or wood panel extending the full width and depth.
The optional heat circulating blower is supplied with a cord. If installed, the junction box must be electrically connected and grounded in accordance with local codes. In the absence of local codes, use the current CSA C22.1 canadian electrical code in Canada or the ANSI/NFPA 70 national electrical code in the United States.
Provide adequate ventilation and combustion air.
Provide adequate accessibility clearance for servicing and operating the fireplace. Never obstruct the front opening of the fireplace.
Objects placed in front of the fireplace must be kept a minimum of 48” from the front face of the unit.
GENERAL INFORMATION
FOR YOUR SATISFACTION, THIS FIREPLACE HAS BEEN
3.5“ water column for natural gas and 10 “ water column for propane.
This fireplace is certified to be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.
No external electricity (110 volts or 24 volts) is required for the gas system operation.
5
This fireplace is only for use with the type of gas indicated on the rating plate. This fireplace is not convertible for use with other gases, unless a certified kit is used.
Expansion / contraction noises during heating up and cooling down cycles are normal and are to be expected. Change in flame appearance from “HI” to “LO” is more evident in natural gas than in propane.
This fireplace is approved for bathroom, bedroom and
room installations
and is suitable for mobile home installation. The inner
stainless steelWelookingSuggestfirebox backthatwillourdiscolourgas with
heat, 
turning
a light brown,hearthstrawproductslike colour thatbeisinstalledto be consid- ered normal
and serviced by profession-
als who are certified in the We Suggest that our gas U.S. by the National Fire- hearth products be installed place Institute (NFI) as NFI and serviced by profession- Gas Specialists.
als who are certified in the
U.S. by the National Fire- CAREplaceOFInstituteGLASS(NFI) as NFI
Do not use abrasive cleanersGas toSpecialistsclean glass. .Buff lightly with a clean dry cloth.
The glass is 3/16” ceramic glass available from your Napoleon® / Wolf Steel Ltd. dealer. Do not substitute materials. Clean theCAREglass afterOFthe GLASSfirst 10 hours of operation with a recommended gas fireplace glass cleaner. Thereafter clean as Do not use abrasive cleaners to clean glass. Buff lightly with a required. Do not clean glass when hot! If the glass is not kept clean dry cloth. The glass is 3/16” ceramic glass available from clean permanent discolouration and / or blemishes may result. your Napoleon® / Wolf Steel Ltd. dealer. Do not substitute
materials. Clean the glass after the first 10 hours of operation with
a recommended gas fireplace glass cleaner. Thereafter clean as required. Do not clean glass when hot! If the glass is not kept clean permanent discolouration and / or blemishes may result.