FireplaceXtrordinair 864 HH installation manual TOP View, Nailing Brackets

14 Installation (for qualified installers only)

Nailing Brackets

There are four nailing brackets on the front of the fireplace. Follow the directions below to prepare the nailing brackets. Once in place, nail or screw the nailing brackets to the framing.

NOTE: Additional nailing brackets are provided along the base of the fireplace. Use these brackets if not using the front brackets.

Make sure the fireplace is square and plumb when placed in the framing. Measured corner-to- corner, the fireplace should be square (approx. 54-7/8” for each dimension). Use shims to insure the fireplace is square.

1/2” Drywall

For installations using

1/2” facing fold the larger

tab out 90° (use a

screwdriver if necessary).

TOP VIEW

Fireplace

Framing

Nailing Bracket

Drywall

5/8” Drywall

For installations using 5/8” drywall fold the shorter tab out 90° (use a screwdriver if necessary).

TOP VIEW

Fireplace

Framing

Nailing Bracket

Drywall

© Travis Industries 4080214 100-01182_003