Installation (for qualified installers only) | 19 |
Electrical Connection (required)
•The electrical line to the grounded receptacle inside the fireplace must be installed by a qualified installer and must meet all local codes.
•Make sure the household breaker is shut off prior to working on any electrical lines.
•The fireplace must be properly grounded in accordance with local codes (or ANSI/NFPA
•The electrical line must be a min. 14 gauge, and supply 120 Volts at 60 Hz (2 Amps)
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation.
Left Side of Fireplace
Grounded Receptacle
Junction Box Assembly
Receptacle Cover Plate
Grounded 110V |
|
Power Supply | Strain Relief |
© Travis Industries | 4080214 |