FireplaceXtrordinair 864 HH installation manual Front View

Installation (for qualified installers only) 35

Thin Facing Installation (tile, marble, or other non-combustible under 1" thick)

Upgrade faces are available for this fireplace and may influence facing installation. Consult with your Travis Dealer if you are using an upgrade face.

Tile Line

Facing is installed to this edge of the fireplace.

Drywall

Tile Line

Do not install tile (or other material) in front of the glass frame, convection channel, or access panel openings. This area must remain open to access internal components and for convection air.

TOP VIEW

Framing

Nailing Bracket

Fireplace

Drywall

Tile

NOTE FOR FPX FACES:

FPX arched faces require the FPX Face Upgrade Kit (sku 98500686) and a triangular piece of facing in these upper corners. See the instructions included with the face for further details.

7-7/8”

2-7/8”

© Travis Industries

Hearth Line

Tile Line

Floor-Mounted Fireplaces or Raised Hearths: Build the hearth 1” (max.) above the base of the fireplace. The fireplace may be raised to accommodate thicker hearth materials.

Raised Fireplaces:

Facing is installed 1” (maximum) above the base of the fireplace.

FRONT VIEW	Fiber Board (must remain in place)
	1-1/2”
	1-1/8”
	34-1/4”
	1”
37”	2”
4080214	100-01182_003