48 Finalizing the Installation (for qualified installers only)
Log Set Installation
Rear Log Installation
These pins insert into
the holes on the bottom of the rear log.
Log Stop
(both sides)
Place the rear log in place and slide it all the way back against the log stops.
Right Log Installation
The burner has a flat portion here with a ridge directly behind it.
Place the right log on the flat portion of the burner and push it back so it rests against the ridge.
Note how the notch on the right log hangs over the side of the burner.
Rotate the inward tip of the log forward so it is directly next to the burner holes.
Travis Industries | 4080214 |