58 | Optional Equipment (for qualified installers only) |
Installation Overview
The optional heat duct allows the fireplace to transfer heat to separate locations in the home. Installation should take place prior to installing drywall.
Warning: This kit must be installed as specified in these instructions. Do not modify any component.
Warning: Use of any external blower other than the Travis Power Heat Duct Blower will void the warranty and listing of this appliance and may create a fire hazard.
Note: The power heat duct must be installed by a qualified service technician.
Note: Some building codes may require the use of firestop spacers whenever the duct passes from room to room.
Note: When routing ducts through a cold area (e.g. crawl space) we recommend insulating the duct with fiberglass insulation. If
Note: One or two het duct kits may be used.
| Electrical Source | Floor |
| Boot | |
Junction Box |
| |
| Maximum Duct | |
|
| Length = 20' |
Rheostat |
|
(with cover plate) |
|
Use 10” x | Blower |
|
wall stack (duct) | Box |
|
when passing | Duct Adapter |
through tight | (6” Round to 10” x |
areas. | 6" Duct |
| |
| Starter Ring |
Grill
Wall Adapter (for use on
2 x 4 walls)
Travis Industries | 4080214 |