Finalizing the Installation (for qualified installers only) | 45 |
Glass Frame Removal and Installation
Warning: The appliance must be completely cool before removing the glass.
Warning: Do not strike or slam the glass.
a | Based upon the face being used, either: |
(a) swing the access door down and remove the top grill, |
(b)remove the face (unscrew or lift off - see the instructions included with the face for details).
Open the four latches holding the glass frame in place (start with the bottom three) - follow the directions shown to the right.
b | Lift the glass frame up and |
pull it forward to remove. |
NOTE:
You may need to lift the glass frame while
Top of
Firebox
Latch
Glass
Catch
(on glass frame)
Re-Attaching the Glass Frame:
a)Hang the glass frame on the firebox.
b)While holding in place, attach the upper latches (follow the instructions to the right in reverse).
c)Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it should be flush with the front of the fireplace when installed.
© Travis Industries | 4080214 |