FireplaceXtrordinair 864 HH installation manual Front View

Installation (for qualified installers only) 37

Thick Facing Installation (stone, brick, or other non-combustible over 1" thick)

If using a Fireplace Xtrordinair (FPX) arched face, see "Thick Facing with a Fireplace Xtrordinair Arched Faces" on page 38.

Do not install masonry (or other material) in front of the

fireplace. This area must remain open to install the face.

TOP VIEW - Protruding Masonry

Framing

Nailing Bracket

Fireplace

Drywall

Line
Masonry	Masonry	Line

Drywall

Hearth Line

Masonry Line

Floor-Mounted Fireplaces or Raised Hearths: Build the hearth 1” (max.) above the base of the fireplace. The fireplace may be raised to accommodate thicker hearth materials.

Raised Fireplaces:

Masonry is installed 1” (maximum) above the base of the fireplace.

FRONT VIEW Fiber Board (must remain in place)

			1-1/2”
	Masonry
TOP VIEW - Recessed Masonry
	Framing
			35-3/4”
Fireplace	Drywall
	(or cement board, etc.)
	Masonry
NOTE: The nailing brackets are not used for this type			1”
of installation - secure the fireplace to the floor with			41”
the brackets along the base of the fireplace.
© Travis Industries		4080214	100-01182_003