Meco Bonza Series manual Fixed LEG/SIDE Table Assembly, Tools, Item 9 8 pcs Item 8 8 pcs, X 1 3/8

Page 10

STEP 2- FIXED LEG/SIDE TABLE ASSEMBLY

(ITEM 2 OR 3) SIDE TABLE

TOOLS:

			OR
	(ITEM 9) 8 pcs		(ITEM 8) 8 pcs
			1/4” x 1”	BOLT
	1/4” x 1 3/8”	BOLT

(ITEM 11) FRONT FIXED LEG - WOOD

OR

(ITEM 13) FRONT FIXED LEG - METAL

(ITEM 10) REAR FIXED LEG - WOOD

(ITEM 12) REAR FIXED LEG - METAL

•In the same way, attach the Front and Rear Fixed Legs to the remaining Side Table using 1/4” x 1” Bolts (1/4” x 1 3/8” for Metal Legs.)

•On models with wooden legs, be sure to position Fixed Legs with the four large recessed holes facing away from Side Table (Fig. C) and the two threaded holes in edge of each leg pointing outward. (Fig. D) Do not tighten bolts completely. (Metal Tubing Legs can be oriented either way.)

FRONT FIXED LEG

BONZA - WOOD

BONZA DELUXE - METAL

SIDE TABLE

(Tear Drop Table

Shown)

REAR FIXED LEG

BONZA - WOOD

BONZA DELUXE - METAL

FIG. C

FOUR LARGE RECESSED HOLES (Wooden Legs Only)

1/4” x 1” BOLT

(1/4” x 1 3/8” Deluxe Models)

FRONT FIXED LEG THREE VELCRO PATCHES FACE INSIDE

FIG. D

THREADED HOLES IN LEGS (Deluxe Models with Metal legs do not have these threaded holes.)

10

Image 10

Contents For Your Safety AussieTM byImportant Safeguards Grill Continuing use. See Before Using Your LP GasDo not attempt to correct the problem yourself Gas tion of cloggedMeco Corporation Bonza PART/DESCRIPTIONBonza Deluxe PART/ Description Bonza Bonza DeluxePART/ Description Bonza PART# QTY DeluxePART/ Description PART# QTY Bonza Wheel LEG/ Side Table Assembly Tools Item 1 or 3 Side Table X 1 3/8 Bolt 8pcs X 1 Bolt 8 pcsItem 9 8 pcs Item 8 8 pcs Fixed LEG/SIDE Table AssemblyTools X 1 3/8LEG Brace Assembly Tools PcsX 1 3/8 Bolt Metal Bottom SHELF/LEG & Caster Assembly ToolsX 1 Bolt Wood LEG X 2 Bolt WOO X 1 Bolt Wood LEG 1/4 x 1 3/8 Bolt Metal LEGItem 26 4 pcs WHEEL/CYLINDER Bracket Assembly ToolsItem 22, 23 X 1/2 BoltGrill BODY/CART ASSEMBLY- Bonza & Bonza Deluxe Models Assembly NextGrill BODY/CART ASSEMBLY- Bonza Models RegulatorNext Install Burner ToolsAttach Decorative Privacy Panel to Cart ALL Models Or 4 PCSFIG. E FIG. FInstall Bottom Body PANEL/GREASE TRAY- ALL Models #8 X 1/2 Screw 2pcsAttach Handle and Heat Indicator to Hood Bonza Models Tools Attach LP Cylinder to Grill ALL Models FIG. HLeak Testing to be Performed in a WELL-VENTILATED Area How to perform a leak testGAS, CYLINDER, Hose Regulator Information Connecting/ Disconnecting LP Gas Cylinder to Grill· Always check for gas leaks when you LP Gas CylinderPrecautions Before Using Your LP GAS GrillSelecting a Location LeakTesting Operating the LP GAS GrillDripping onto the cart and/or a grease fire Lighting the Grill Using the Integra Spark Ignition SystemPreparation Before Cooking Confirm each burner is lit before lighting another burnerCooking Mode Charcoal only Cooking Mode LP GAS with Wood Chunks for FlavorWood Chunks placed along left or right side of grill Manual Lighting of the Grill How to manually light your LP gas grillOpen hood Grill Cooking Care and MaintenanceCheck Your Flame End of Cooking Session Roasting Hood CookingHow to clean porcelain coated cast iron burners Burner MaintenancePorcelain coated Cooking Surfaces Hood Flavor Activators Cleaning the Grill BodyBottom Panel/ Grease Tray Preventive Maintenance Cleaning instructions for Charcoal and Wood chunk ashCaring for the Wood Cart Burners will not light Using the igniterUsing a match Low flame or low heatPersistent grease fire Flames blow outFlare up Humming orImportant Notice Limited Warranty