Meco Bonza Deluxe Series, Bonza Series manual Cleaning instructions for Charcoal and Wood chunk ash

Page 31

Cleaning instructions for Charcoal and Wood chunk ash(Continued)

6.Close the hood and remove the drip pan and bottom panel to dispose of ashes. The bottom panel can be removed by first removing the screw on each side of the grill. For easier cleaning of charcoal ashes the bot- tom panel can be lined with aluminum foil. Make sure all openings are left unobstructed and cut a hole for the grease to drip into the grease pan.

Your Cart is manufactured using a hardwood ideally suited to outdoor use. To maintain its condition and appearance, annual application of polyurethane is recommended.

·Follow all instructions and warnings listed on the polyurethane container.

·Always use a brush to apply the polyurethane, do not use a spray can.

·Do not apply polyurethane to the metal grill body.

·Using the Grill Storage Cover (50) will help maintain the appearance of your grill and protect the finish.

Bottom Panel

Drip Pan

7.Reinstall drip pan and bottom panel.

8.Reinstall the burners and lower the louvers into position. Make sure the left louver rests on the right louver when rotated into position.

9.Push, then pull the louver adjusting knob to ensure the louvers function correctly.

10. Install cooking grids.

11.Position louvers in either gas or charcoal mode to prepare for next cooking session.

Caring for the Wood Cart

·Always turn off the LP gas cylinder at the LP cylinder valve when not in use. Allow grill to cool before handling parts or cleaning.

·Do not use aerosols or store flammable liquids or materials near this gas grill.

·Never apply polyurethane to the wood cart while grill is in use or hot. Allow polyurethane to

completely dry before further use.

 

 

Preventive Maintenance

In addition to the above Care and Maintenance Instruction,

periodically check and tighten all nuts, bolts, and screws.

 

 

Storage

· Never store an LP gas cylinder indoors (empty or

filled).

If storing the gas grill indoors,

disconnect

the LP gas cylinder and store it outdoors

out of the

reach of children.

· Never leave an LP gas cylinder inside a

vehicle

which may become overheated by the sun.

·Never store a spare or disconnected LP gas cylinder under or near the LP gas grill.

·Always turn off the gas cylinder when not in use. Allow grill to cool before handling parts or cleaning.

·Even though your LP gas cylinder may appear to

be empty, gas may still be present and the cylinder should be transported and stored accordingly.

·Store your LP gas grill in a cool dry place .

·Disconnect LP gas cylinder from grill and store outside,

in

a dry, well-ventilated area, away from any sources of

heat or ignition. Re-cap LP cylinder valve with the Safety

Cap.

·Remove burners and wrap with aluminum foil to prevent insects from entering the burner holes. Store wrapped

burners on top of the cooking grids.

·Before next use, remove aluminum foil and reinstall burners and grids according to Steps 8 and 10 of

Assembly Instructions. · Check your LP gas grill for gas leaks, deterioration, proper assembly, and burner obstructions before using the

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents AussieTM by For Your SafetyImportant Safeguards Gas tion of clogged Continuing use. See Before Using Your LP GasDo not attempt to correct the problem yourself GrillMeco Corporation Bonza PART/DESCRIPTIONBonza Deluxe Bonza Bonza Deluxe PART/ DescriptionDeluxe PART/ Description Bonza PART# QTYPART/ Description PART# QTY Bonza Item 1 or 3 Side Table X 1 3/8 Bolt 8pcs X 1 Bolt 8 pcs Wheel LEG/ Side Table Assembly ToolsX 1 3/8 Fixed LEG/SIDE Table AssemblyTools Item 9 8 pcs Item 8 8 pcsPcs LEG Brace Assembly ToolsX 1 Bolt Wood LEG 1/4 x 1 3/8 Bolt Metal LEG Bottom SHELF/LEG & Caster Assembly ToolsX 1 Bolt Wood LEG X 2 Bolt WOO X 1 3/8 Bolt MetalX 1/2 Bolt WHEEL/CYLINDER Bracket Assembly ToolsItem 22, 23 Item 26 4 pcsAssembly Next Grill BODY/CART ASSEMBLY- Bonza & Bonza Deluxe ModelsRegulator Grill BODY/CART ASSEMBLY- Bonza ModelsOr 4 PCS Install Burner ToolsAttach Decorative Privacy Panel to Cart ALL Models NextFIG. F FIG. E#8 X 1/2 Screw 2pcs Install Bottom Body PANEL/GREASE TRAY- ALL ModelsAttach Handle and Heat Indicator to Hood Bonza Models Tools FIG. H Attach LP Cylinder to Grill ALL ModelsHow to perform a leak test Leak Testing to be Performed in a WELL-VENTILATED AreaLP Gas Cylinder Connecting/ Disconnecting LP Gas Cylinder to Grill· Always check for gas leaks when you GAS, CYLINDER, Hose Regulator InformationPrecautions Before Using Your LP GAS GrillSelecting a Location Operating the LP GAS Grill LeakTestingConfirm each burner is lit before lighting another burner Lighting the Grill Using the Integra Spark Ignition SystemPreparation Before Cooking Dripping onto the cart and/or a grease fireCooking Mode Charcoal only Cooking Mode LP GAS with Wood Chunks for FlavorWood Chunks placed along left or right side of grill Manual Lighting of the Grill How to manually light your LP gas grillOpen hood Roasting Hood Cooking Care and MaintenanceCheck Your Flame End of Cooking Session Grill CookingHow to clean porcelain coated cast iron burners Burner MaintenancePorcelain coated Cooking Surfaces Hood Flavor Activators Cleaning the Grill BodyBottom Panel/ Grease Tray Preventive Maintenance Cleaning instructions for Charcoal and Wood chunk ashCaring for the Wood Cart Low flame or low heat Using the igniterUsing a match Burners will not lightHumming or Flames blow outFlare up Persistent grease fireImportant Notice Limited Warranty
Top Page Image Contents