Meco Bonza Series, Bonza Deluxe Series manual Attach LP Cylinder to Grill ALL Models, Fig. H

Page 20

STEP 12-ATTACH LP CYLINDER TO GRILL - (ALL MODELS)

•Obtain a filled LP Cylinder at your local LP gas supplier or exchange center.

•Set bottom ring of LP Cylinder into Cylinder Bracket through round hole in Bottom Shelf (Fig. H). Turn Adjusting Knob clockwise to secure LP Cylinder inside Cylinder Bracket(Fig. H).

•Turn all control knobs and LP Cylinder valve to the “Off” position.

•Take the protective cap off the cylinder valve. (Fig. I) Hold Regulator in a straight line with LP Cylinder valve so the connection does not cross thread. Insert nipple into the cylinder valve. Hand tighten coupling nut in clockwise direction. Do not use tools.

•Make sure Regulator hose does not contact hot metal surfaces.

WARNING: Do not use grill if this connection can not be completed. Be sure to

test	this connection for gas leaks before operation of Gas Grill.

ROUTE HOSE UNDER BRACE ON MODELS WITH WOODEN LEGS

LP CYLINDER

ADJUSTING

KNOB

ROUTE HOSE ON

OUTSIDE OF LEG ON

ALL MODELS

FIG. H

REGULATOR

LP GAS VALVE

TURN REGULATOR COUPLING NUT CLOCKWISE TO TIGHTEN

FIG. I

PROTECTIVE CAP

20

Image 20

Contents For Your Safety AussieTM byImportant Safeguards Continuing use. See Before Using Your LP Gas Do not attempt to correct the problem yourselfGrill Gas tion of cloggedMeco Corporation Bonza Deluxe PART/DESCRIPTIONBonza PART/ Description Bonza Bonza DeluxePART/ Description Bonza PART# QTY DeluxePART/ Description PART# QTY Bonza Wheel LEG/ Side Table Assembly Tools Item 1 or 3 Side Table X 1 3/8 Bolt 8pcs X 1 Bolt 8 pcsFixed LEG/SIDE Table Assembly ToolsItem 9 8 pcs Item 8 8 pcs X 1 3/8LEG Brace Assembly Tools PcsBottom SHELF/LEG & Caster Assembly Tools X 1 Bolt Wood LEG X 2 Bolt WOOX 1 3/8 Bolt Metal X 1 Bolt Wood LEG 1/4 x 1 3/8 Bolt Metal LEGWHEEL/CYLINDER Bracket Assembly Tools Item 22, 23Item 26 4 pcs X 1/2 BoltGrill BODY/CART ASSEMBLY- Bonza & Bonza Deluxe Models Assembly NextGrill BODY/CART ASSEMBLY- Bonza Models RegulatorInstall Burner Tools Attach Decorative Privacy Panel to Cart ALL ModelsNext Or 4 PCSFIG. E FIG. FInstall Bottom Body PANEL/GREASE TRAY- ALL Models #8 X 1/2 Screw 2pcsAttach Handle and Heat Indicator to Hood Bonza Models Tools Attach LP Cylinder to Grill ALL Models FIG. HLeak Testing to be Performed in a WELL-VENTILATED Area How to perform a leak testConnecting/ Disconnecting LP Gas Cylinder to Grill · Always check for gas leaks when youGAS, CYLINDER, Hose Regulator Information LP Gas CylinderSelecting a Location Before Using Your LP GAS GrillPrecautions LeakTesting Operating the LP GAS GrillLighting the Grill Using the Integra Spark Ignition System Preparation Before CookingDripping onto the cart and/or a grease fire Confirm each burner is lit before lighting another burnerWood Chunks placed along left or right side of grill Cooking Mode LP GAS with Wood Chunks for FlavorCooking Mode Charcoal only Open hood How to manually light your LP gas grillManual Lighting of the Grill Care and Maintenance Check Your Flame End of Cooking SessionGrill Cooking Roasting Hood CookingPorcelain coated Cooking Surfaces Hood Burner MaintenanceHow to clean porcelain coated cast iron burners Bottom Panel/ Grease Tray Cleaning the Grill BodyFlavor Activators Caring for the Wood Cart Cleaning instructions for Charcoal and Wood chunk ashPreventive Maintenance Using the igniter Using a matchBurners will not light Low flame or low heatFlames blow out Flare upPersistent grease fire Humming orImportant Notice Limited Warranty