Meco Bonza Deluxe Series Flames blow out, Flare up, Persistent grease fire, Humming or, Regulator

Page 33

Problem	Possible Cause	Solution

Flames blow out	High or gusting winds	Turn front of grill to face wind or increase flame height.
	Gas in LP cylinder is low	Check LP gas cylinder. Refill if necessary.
	Excess flow valve tripped	See “Low flame” problem above

Flare up	Grease build up	Clean grill
	Excessive fat in meat	Trim fat from meat before grilling

Persistent grease fire	Grease trapped around burn-	Turn control knobs “off” and turn handle of LP cylinder clock-
	er system	wise until it stops. Open hood carefully and let fire burn out.
		After the grill cools, remove and clean all parts.

Unable to fill LP tank Some dealers have older fill nozzles with worn threads.

The worn nozzles do not have enough “bite” to engage the valve. Try another licensed LP dealer or purchase a new tank with an OPD (Overfilling Prevention Device.)

Humming or	Outside temperature, humid-
whistling from the	ity, barometric pressure, and
regulator	the gas level within the tank
	may cause the rubber dia-
	phragm inside the regulator
	to vibrate, making a humming
	or whistling sound.

Although this sound may be alarming, this is NOT dangerous as long as it is not accompanied by the smell of gas. Simply adjust the burner settings and usually the sound will subside. If the humming sound persists, a change in atmospheric conditions will eventually stop the vibration. Should you smell gas, do not use the grill and call Customer Service at 1-800-251-7558

If your problem is not resolved from the information provided above, please call Customer Service at

1-800-251-7558.

33

Image 33

Contents AussieTM by For Your SafetyImportant Safeguards Do not attempt to correct the problem yourself Continuing use. See Before Using Your LP GasGrill Gas tion of cloggedMeco Corporation PART/DESCRIPTION BonzaBonza Deluxe Bonza Bonza Deluxe PART/ DescriptionDeluxe PART/ Description Bonza PART# QTYPART/ Description PART# QTY Bonza Item 1 or 3 Side Table X 1 3/8 Bolt 8pcs X 1 Bolt 8 pcs Wheel LEG/ Side Table Assembly ToolsTools Fixed LEG/SIDE Table AssemblyItem 9 8 pcs Item 8 8 pcs X 1 3/8Pcs LEG Brace Assembly ToolsX 1 Bolt Wood LEG X 2 Bolt WOO Bottom SHELF/LEG & Caster Assembly ToolsX 1 3/8 Bolt Metal X 1 Bolt Wood LEG 1/4 x 1 3/8 Bolt Metal LEGItem 22, 23 WHEEL/CYLINDER Bracket Assembly ToolsItem 26 4 pcs X 1/2 BoltAssembly Next Grill BODY/CART ASSEMBLY- Bonza & Bonza Deluxe ModelsRegulator Grill BODY/CART ASSEMBLY- Bonza ModelsAttach Decorative Privacy Panel to Cart ALL Models Install Burner ToolsNext Or 4 PCSFIG. F FIG. E#8 X 1/2 Screw 2pcs Install Bottom Body PANEL/GREASE TRAY- ALL ModelsAttach Handle and Heat Indicator to Hood Bonza Models Tools FIG. H Attach LP Cylinder to Grill ALL ModelsHow to perform a leak test Leak Testing to be Performed in a WELL-VENTILATED Area· Always check for gas leaks when you Connecting/ Disconnecting LP Gas Cylinder to GrillGAS, CYLINDER, Hose Regulator Information LP Gas CylinderBefore Using Your LP GAS Grill PrecautionsSelecting a Location Operating the LP GAS Grill LeakTestingPreparation Before Cooking Lighting the Grill Using the Integra Spark Ignition SystemDripping onto the cart and/or a grease fire Confirm each burner is lit before lighting another burnerCooking Mode LP GAS with Wood Chunks for Flavor Cooking Mode Charcoal onlyWood Chunks placed along left or right side of grill How to manually light your LP gas grill Manual Lighting of the GrillOpen hood Check Your Flame End of Cooking Session Care and MaintenanceGrill Cooking Roasting Hood CookingBurner Maintenance How to clean porcelain coated cast iron burnersPorcelain coated Cooking Surfaces Hood Cleaning the Grill Body Flavor ActivatorsBottom Panel/ Grease Tray Cleaning instructions for Charcoal and Wood chunk ash Preventive MaintenanceCaring for the Wood Cart Using a match Using the igniterBurners will not light Low flame or low heatFlare up Flames blow outPersistent grease fire Humming orImportant Notice Limited Warranty