Meco Bonza Series, Bonza Deluxe Series manual Important Notice

Page 34

IMPORTANT NOTICE

The gas grill is setup to operate with a LP Gas Cylinder equipped

with an OPD (Overfilling Prevention Device).

This is a secondary device to prevent the overfilling of your LP Gas cylinder. The proper methods for the filling of your LP Gas cylinder are by weight or volume, as described in NFPA 58. Please make sure your filling station fills your LP Gas cylinder by weight or volume. Ask your filling station to read purging and filling instructions on the LP cylinder before attempting to fill.

Rises up while filling then stops when full.

WARNING! Do not exchange the LP Gas cylinder unless the exchange LP cylinder is equipped with an OPD. Otherwise you will lose the OPD

(Overfilling	Prevention Device) feature. If there is not an LP cylinder avail-
able for exchange	equipped with an OPD, we recommend that you have your
cylinder filled at an	authorized LP gas dealer by a qualified attendant.

Image 34

Contents For Your Safety AussieTM byImportant Safeguards Grill Continuing use. See Before Using Your LP GasDo not attempt to correct the problem yourself Gas tion of cloggedMeco Corporation Bonza PART/DESCRIPTIONBonza Deluxe PART/ Description Bonza Bonza DeluxePART/ Description Bonza PART# QTY DeluxePART/ Description PART# QTY Bonza Wheel LEG/ Side Table Assembly Tools Item 1 or 3 Side Table X 1 3/8 Bolt 8pcs X 1 Bolt 8 pcsItem 9 8 pcs Item 8 8 pcs Fixed LEG/SIDE Table AssemblyTools X 1 3/8LEG Brace Assembly Tools PcsX 1 3/8 Bolt Metal Bottom SHELF/LEG & Caster Assembly ToolsX 1 Bolt Wood LEG X 2 Bolt WOO X 1 Bolt Wood LEG 1/4 x 1 3/8 Bolt Metal LEGItem 26 4 pcs WHEEL/CYLINDER Bracket Assembly ToolsItem 22, 23 X 1/2 BoltGrill BODY/CART ASSEMBLY- Bonza & Bonza Deluxe Models Assembly NextGrill BODY/CART ASSEMBLY- Bonza Models RegulatorNext Install Burner ToolsAttach Decorative Privacy Panel to Cart ALL Models Or 4 PCSFIG. E FIG. FInstall Bottom Body PANEL/GREASE TRAY- ALL Models #8 X 1/2 Screw 2pcsAttach Handle and Heat Indicator to Hood Bonza Models Tools Attach LP Cylinder to Grill ALL Models FIG. HLeak Testing to be Performed in a WELL-VENTILATED Area How to perform a leak testGAS, CYLINDER, Hose Regulator Information Connecting/ Disconnecting LP Gas Cylinder to Grill· Always check for gas leaks when you LP Gas CylinderPrecautions Before Using Your LP GAS GrillSelecting a Location LeakTesting Operating the LP GAS GrillDripping onto the cart and/or a grease fire Lighting the Grill Using the Integra Spark Ignition SystemPreparation Before Cooking Confirm each burner is lit before lighting another burnerCooking Mode Charcoal only Cooking Mode LP GAS with Wood Chunks for FlavorWood Chunks placed along left or right side of grill Manual Lighting of the Grill How to manually light your LP gas grillOpen hood Grill Cooking Care and MaintenanceCheck Your Flame End of Cooking Session Roasting Hood CookingHow to clean porcelain coated cast iron burners Burner MaintenancePorcelain coated Cooking Surfaces Hood Flavor Activators Cleaning the Grill BodyBottom Panel/ Grease Tray Preventive Maintenance Cleaning instructions for Charcoal and Wood chunk ashCaring for the Wood Cart Burners will not light Using the igniterUsing a match Low flame or low heatPersistent grease fire Flames blow outFlare up Humming orImportant Notice Limited Warranty