Meco Bonza Deluxe Series, Bonza Series manual Fig. E, Fig. F

.•Fit venturi end of Burner through hole in the inside firewall (behind control panel) and onto Gas Control Valve Nozzle (Fig. E & Fig. F). Be careful not to bend or force gas collector plates.

Holes in

Front firewall.

Gas Nozzle

Control Valve

Gas Collector and

Electrode

Venturi end of Burner inserted over gas nozzle.

FIG. E

FIG. F

Manual Lighting

Holes

Top plate

of gas collector.

REFERENCE: ELECTRODE GAP Adjust Tab until spark is visible.

ELECTRODE

3/16” Approximate gap TAB-GAS COLLECTOR

•Place other end of burner on lower shoulder of rear firewall so Burner Peg rests in Burner Locator Hole as shown (Fig. G).

•Using Pliers, insert Cotter Pin through hole in Burner Peg to secure. This is easier done from backside of grill looking up underneath rear firewall.

•Repeat above steps for remaining burners .

BURNER	BURNER PEG
	BURNER
	LOCATOR HOLE
	IN LOWER
	SHOULDER

COTTER PIN Install from underneath Backside of grill.

FIG. G

17