Chateau™ Direct Vent Gas Fireplace
firebox. Tilt it carefully toward the side until the piece is in place. Using the two (2) brackets and four (4) screws provided with the refractory kit, fasten each bracket to the top of the firebox on each side. NOTE: Use existing holes in firebox.
4.Place the right and left hearth refractories at on each side of the burner tube assembly.
5.Install the end hearth refractories and align with the right and left hearth refractories already installed.
6.Reinstall the burner tube and fettle.
Log, Lava Rock and Ember Placement
Unpack the logs from packaging and remove each log from its wrapping material.
The logs are fragile and should be handled with care. Keep the packaging materials out of the reach of children and dispose of the material in a safe manner.
IMPORTANT: Review these instructions and famil- iarize yourself with each log before beginning log placement. Find the notches, pins and indentations on each log. Follow the instructions closely, using the Log ID (Fig. 41) and the illustrations to assist in correctly placing each log.
Log Pilot Plumbing (F50) | Log Overlay (F56) | Log Grate/Burner Tube (F51) (2) |
| ||
|
| |
|
| Log Front Upper Right (F47) (2) |
Log Right Grate (F49) (2) | Log Middle (F52) |
|
|
|
Log Left Grate (F53) (2) | Log Front Right (F48) |
LG492
Fig. 41 DVT38Sw log identification.
28 | 20011957 |