| GAS INSTRUCTIONS | 17 |
CHECK: |
| |
1) | Bulkhead and gas supply hose connection. |
|
2) | Main gas line to manifold connections. |
|
WARNING: If there is a leak at connection (1, or 2), retighten the fitting with a wrench and recheck for leaks with soap and water solution.
If a leak persists after
3) Side burner hose to bulkhead connection.
4) Side burner hose to Quick disconnect connection, side burner valve and orifice connections.
5) Regulator to cylinder connection.
6) Hose to regulator connection.
7) Valves to manifold connections.
WARNING: If there is a leak at connections (3, 4, 5, 6 or 7), turn off the gas. DO NOT OPERATE THE GRILL. Contact the Customer Service Representative in your area using the contact information on our web site.
Log onto www.weber.com®.
When leak checks are complete, turn gas supply off at the source and rinse connections with water.
*The grill illustrated may have slight differences than the model purchased.
WWW.WEBER.COM®