Panasonic CS-C24KKS, CU-C18KKS, CU-C24KKS, CS-C18KKS dimensions Press continously for 15s

•e-ion Check Mode

o e-ion abnormality check mode

o Purpose is to improve sensor serviceability when sensor is malfunction.

(1)Control starting condition

When all of the conditions are formed

ƒNot in Patrol Demo mode.

ƒe-ion operation ON.

ƒWhen e-ion check mode signal is received; the procedure of selection is as shown:

•Press “Set” button continuously for 15 seconds by using pointer to enter internal setting mode.

•Press “Timer Decrement" button to select “CHC”.

•Confirm setting by pressing “Timer Set” button, a “beep” sound will be heard.

Press continously for 15s

SET

SET

Transmit Patrol default OFF/ON code (Buzzer: OFF:Long Beep, ON:Short Beep)

SET

Transmit Patrol demo code

(Buzzer: OFF:Long Beep, ON:Short Beep)

SET

Transmit ECO demo code

(Buzzer: OFF:Long Beep, ON:Short Beep)

SET

Transmit check code (Buzzer:Short Beep)

oIf abnormal discharge is detected at filter (short-circuited) due to water or dust adhesion, etc., the e-ion indicator blinks immediately.

43