14.2 Remote Control Button
14.2.1SET Button
•To check current remote control transmission code and store the transmission code to EEPROM: o Press “Set” button for more than 10 seconds
o Press “Timer Set” button until a “beep” sound is heard as confirmation of transmission code change.
•To change the air quality sensor:
o Press and release by using pointer
o Press the Timer Decrement button to select sensitivity:
1.Low sensitivity
2.Standard (Default)
3.Hi sensitivity
oConfirm setting by pressing Timer Set button, a “beep” sound will be heard. LCD returns to original display
after 2 seconds.
oLCD returns to original display if remote control does not operate for 30 seconds.
14.2.2CLOCK Button
•To change the remote control time format: o Press for more than 5 seconds
14.2.3RESET (RC) Button
•To clear and restore the remote control setting to factory default. o Press once to clear the memory
14.2.4TIMER ▲
•To change indoor unit indicators’ intensity: o Press continuously for 5 seconds.
14.2.5TIMER ▼
•To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F) o Press continuously for 10 seconds.
52