A&D Ambulatory Blood Pressure Monitor Conditions When Recorder Switched On, Display & key, Items

Page 15

Conditions When Recorder Switched On

The recorder can be turned on in 3 different modes.

When recorder is			Condition	Actions
	turned on.

The	beeper	sounds	The recorder parameters	You can use the re-
once and the clock is			are stored	corder at once.
displayed. (Normal
mode)

The beeper is sounded			All parameters are lost.	Set up parameters of
once and E00		blinks.		"display and clock"
				and "Automatic mea-
The	buzzer	sounds	The mode after reset. All	surement".
four	times and E00		parameters are lost.
blinks.

Parameters for the Display and Clock

This setting selects the display during automatic measurement sequence and adjusts the clock parameters. The sequence number tells you which parameter you are adjusting.

Display & key

Sequence number

Parameter

START

STOP

AUTO

ON/OFF

Selecting a sequence number

Selecting a parameter

		Sign of setting up parameters for display and clock
Items

Sequence	Value &	Meaning of parameters
number	range

	0	Displaying clock only in automatic measurement
1
1	1	Displaying pressure and result in automatic
		measurement

5	00 ~ 99	Years (1997 ~ 2096)

6	01 ~ 12	Month

7	01 ~ 31	Day

8	00 ~ 23	Hour

9	00 ~ 59	Minute

Initializing the recorder		Page 13	Conditions When Recorder Switched On

Image 15

Contents TM-2430 Page Contents Before use ComplianceDefinitions Precautions for Use During use Periodic maintenanceStorage Before usePacking List and Component Names WelcomeProduct overview Welcome and IntroductionAir socket Display SymbolsSpecifications FeaturesFunctions and Specifications Pressurization Automatic measurementStopping a measurement Concealing the measurement value Performance specifications Environment specifications Activating the recorder Replacing BatteriesSteps for replacing the batteries Display & key Conditions When Recorder Switched OnWhen recorder is Condition Actions Turned on Parameters for the Display and ClockSteps for setting the display and clock Steps for selecting a mode Selection for the Automatic MeasurementMode Set up procedure Mode III SettingsAs the start time of the third block Steps for automatic measurementFrom previous Steps for deleting old data Resetting the RecorderSteps for reset Deleting Old DataManual measurement Stopping or canceling an automatic measurementPreparing the patient Patient instructionsUse of the cuff cover Attaching the cuff and recorderSteps for attaching the cuff and recorder Range, you need a proper cuff Using the Belt Using the Shoulder BandPreparation of the Carrying Case To stop a Current Measurement OperationAutomatic Measurement Manual MeasurementSpecifications for an adaptable printer Data TransferData Transmission to a Printer Print sample Steps for data transmissionData Transmission to a Computer Using Analysis Soft Analysis Software and Communication Cables Options and accessoriesOthers Cuffs and Other AccessoriesCuff sleeves Cuff coverSteps for checking accuracy MaintenanceChecking Accuracy Required equipmentCleaning the cuff and recorder Problem solvingPeriodical inspection Error code updates without announcement Error codesMaintenance Error Code Memo