A&D Ambulatory Blood Pressure Monitor Data Transmission to a Computer Using Analysis Soft

Page 29

Data Transmission to a Computer Using Analysis Soft-

Caution

❏The recorder intensely consumes the battery power while connected to the RS-232C cable. Disconnect the cable when not actually transferring data.

❏Maintain the power-on state while transmitting the data so that the data is not damaged.

Steps for data transmission

Step 1	Connect the cable to both the recorder and printer. The
	recorder displays	. Refer to "Analysis Soft-

	ware and Communication Cable" about the cable.
	Read the data using the optional analysis software.
Step 2
	Refer to the software instruction manual.

	Remove the cable at once. The clock is displayed.
Step 3

Connection

Reading data with sofware

Remove the cable

Data Transmission to the Computer with Analysis Software Page 27

Data transfer

Image 29

Contents TM-2430 Page Contents Definitions Before useCompliance Precautions for Use Storage Periodic maintenanceBefore use During useProduct overview WelcomeWelcome and Introduction Packing List and Component NamesAir socket Display SymbolsFunctions and Specifications SpecificationsFeatures Stopping a measurement Automatic measurementConcealing the measurement value PressurizationPerformance specifications Environment specifications Steps for replacing the batteries Activating the recorderReplacing Batteries When recorder is Condition Actions Turned on Conditions When Recorder Switched OnParameters for the Display and Clock Display & keySteps for setting the display and clock Mode Steps for selecting a modeSelection for the Automatic Measurement Set up procedure Mode III SettingsAs the start time of the third block Steps for automatic measurementFrom previous Steps for reset Resetting the RecorderDeleting Old Data Steps for deleting old dataPreparing the patient Stopping or canceling an automatic measurementPatient instructions Manual measurementSteps for attaching the cuff and recorder Use of the cuff coverAttaching the cuff and recorder Range, you need a proper cuff Preparation of the Carrying Case Using the BeltUsing the Shoulder Band Automatic Measurement Operation Manual Measurement To stop a Current MeasurementData Transmission to a Printer Specifications for an adaptable printerData Transfer Print sample Steps for data transmissionData Transmission to a Computer Using Analysis Soft Analysis Software and Communication Cables Options and accessoriesCuff sleeves Cuffs and Other AccessoriesCuff cover OthersChecking Accuracy MaintenanceRequired equipment Steps for checking accuracyPeriodical inspection Cleaning the cuff and recorderProblem solving Error code updates without announcement Error codesMaintenance Error Code Memo