A&D Ambulatory Blood Pressure Monitor Storage, Before use, During use, After use

Page 6

Notes on the Blood Pressure Recorder

Storage

❏Do not store the recorder in the following places.

Excessive moisture

Excessive heat

Direct sun light

Excessive vibration

Exposure to dust

Exposure to corrosive chemicals

Magnetic fields

Before use

❏Cover the RS-232C terminal using the rubber cap, to avoid dust.

❏Confirm that the recorder works correctly.

❏Confirm that the cuff and air hose are connected properly.

❏Cuffs should be clean prior to use with patient.

❏Clear the old data before starting a new measurement.

❏Avoid strong magnetic field and static electricity.

❏Do not use this recorder near a high frequency surgical equipment.

During use

❏The recorder should be operated by a medical professional who knows it well.

❏Stop using the recorder if the patient feels pain in the arm or if the recorder does not measure properly.

❏If the recorder is exposed to excessive moisture, do not use. Immediately request service from vendor.

After use

❏Clean the recorder, cuff and accessories for the next use. Do not pull or kink hoses. Do not use organic solvent, antiseptic solution, etc.

❏Turn off the power switch.

❏Please use the original box for transportation of the monitor.

Periodic maintenance

❏The recorder is a precision instrument. Please check all functions (every year) periodically. Contact your nearest A&D office for this inspection.

Environmental protection

❏If you disuse the recorder, remove Ni-Cd battery and built-in Li battery from

this recorder.

❏ Disuse Ni-Cd battery to its exclusive trash can because of recycling it. Ni-Cd❏ Dispose of Li ion battery in the recorder as dangerous object properly.

Notes on the Blood Pressure Recorder

Page 4

Before use

Page 5 Page 7
Image 6
Page 5 Page 7
Contents TM-2430 Page Contents Before use ComplianceDefinitions Precautions for Use Before use Periodic maintenanceStorage During useWelcome and Introduction WelcomeProduct overview Packing List and Component NamesAir socket Symbols DisplaySpecifications FeaturesFunctions and Specifications Concealing the measurement value Automatic measurementStopping a measurement PressurizationPerformance specifications Environment specifications Activating the recorder Replacing BatteriesSteps for replacing the batteries Parameters for the Display and Clock Conditions When Recorder Switched OnWhen recorder is Condition Actions Turned on Display & keySteps for setting the display and clock Steps for selecting a mode Selection for the Automatic MeasurementMode Mode III Settings Set up procedureSteps for automatic measurement As the start time of the third blockFrom previous Deleting Old Data Resetting the RecorderSteps for reset Steps for deleting old dataPatient instructions Stopping or canceling an automatic measurementPreparing the patient Manual measurementUse of the cuff cover Attaching the cuff and recorderSteps for attaching the cuff and recorder Range, you need a proper cuff Using the Belt Using the Shoulder BandPreparation of the Carrying Case Manual Measurement OperationAutomatic Measurement To stop a Current MeasurementSpecifications for an adaptable printer Data TransferData Transmission to a Printer Steps for data transmission Print sampleData Transmission to a Computer Using Analysis Soft Options and accessories Analysis Software and Communication CablesCuff cover Cuffs and Other AccessoriesCuff sleeves OthersRequired equipment MaintenanceChecking Accuracy Steps for checking accuracyCleaning the cuff and recorder Problem solvingPeriodical inspection Error codes Error code updates without announcementMaintenance Error Code Memo
Top Page Image Contents