A&D Ambulatory Blood Pressure Monitor instruction manual From previous

Page 20

Step13

Step14

Step15

Step16

Press the START STOP key. The current frequency of the third block is displayed.

Press the AUTO ON/OFF key so as to display "10" for 10 minutes as the frequency of the third block.

Press the START STOP key. The current start time of the fourth block is displayed.

Press the START STOP key. The recorder stores these parameters and displays the clock, (because the current start time of the fourth block is the same start time of the first block).

From previous page

START STOP

AUTO ON/OFF

START STOP

START STOP

Selection for the Automatic Measurement

Page 18

Initializing the recorder

Image 20

Contents TM-2430 Page Contents Definitions Before useCompliance Precautions for Use Periodic maintenance StorageBefore use During useWelcome Product overviewWelcome and Introduction Packing List and Component NamesAir socket Symbols DisplayFunctions and Specifications SpecificationsFeatures Automatic measurement Stopping a measurementConcealing the measurement value PressurizationPerformance specifications Environment specifications Steps for replacing the batteries Activating the recorderReplacing Batteries Conditions When Recorder Switched On When recorder is Condition Actions Turned onParameters for the Display and Clock Display & keySteps for setting the display and clock Mode Steps for selecting a mode Selection for the Automatic Measurement Mode III Settings Set up procedureSteps for automatic measurement As the start time of the third blockFrom previous Resetting the Recorder Steps for resetDeleting Old Data Steps for deleting old dataStopping or canceling an automatic measurement Preparing the patientPatient instructions Manual measurementSteps for attaching the cuff and recorder Use of the cuff coverAttaching the cuff and recorder Range, you need a proper cuff Preparation of the Carrying Case Using the BeltUsing the Shoulder Band Operation Automatic MeasurementManual Measurement To stop a Current MeasurementData Transmission to a Printer Specifications for an adaptable printerData Transfer Steps for data transmission Print sampleData Transmission to a Computer Using Analysis Soft Options and accessories Analysis Software and Communication CablesCuffs and Other Accessories Cuff sleevesCuff cover OthersMaintenance Checking AccuracyRequired equipment Steps for checking accuracyPeriodical inspection Cleaning the cuff and recorderProblem solving Error codes Error code updates without announcementMaintenance Error Code Memo