A&D Ambulatory Blood Pressure Monitor Preparation of the Carrying Case, Using the Belt

Page 25

Preparation of the Carrying Case

❏Use the belt or shoulder band to attach the carrying case.

❏We recommend the belt be used for added stability.

Using the Belt
Step 1	Insert the belt into the hole of
	the carrying case.
Step 2	Pull the belt from the hole of
	the carrying case.
Step 3	Pass the belt through the ring.
Step 4	Thread the belt through the
	front-hole and the rear-hole
	of the hook.
Step 5	Insert the belt to the ring again.

Carrying case
Step 1	Step 2
		Example
	Step 3
	Ring	Step 5
	Ring

Belt

Front-hole

Rear-hole

Hook	Step 4

Using the Shoulder Band

Step 1	Insert the band into the buckle.

Step 2	Pass the belt through the ring.
Step 3	Thread the belt through the
	buckle. See illustration on right.

Buckle

Step 1

Step 2

Step 3

Example

Initializing the recorder

Page 23

Attaching the Cuff and Recorder

Image 25

Contents TM-2430 Page Contents Compliance Before useDefinitions Precautions for Use Storage Periodic maintenanceBefore use During useProduct overview WelcomeWelcome and Introduction Packing List and Component NamesAir socket Display SymbolsFeatures SpecificationsFunctions and Specifications Stopping a measurement Automatic measurementConcealing the measurement value PressurizationPerformance specifications Environment specifications Replacing Batteries Activating the recorderSteps for replacing the batteries When recorder is Condition Actions Turned on Conditions When Recorder Switched OnParameters for the Display and Clock Display & keySteps for setting the display and clock Selection for the Automatic Measurement Steps for selecting a modeMode Set up procedure Mode III SettingsAs the start time of the third block Steps for automatic measurementFrom previous Steps for reset Resetting the RecorderDeleting Old Data Steps for deleting old data Preparing the patient Stopping or canceling an automatic measurement Patient instructions Manual measurementAttaching the cuff and recorder Use of the cuff coverSteps for attaching the cuff and recorder Range, you need a proper cuff Using the Shoulder Band Using the BeltPreparation of the Carrying Case Automatic Measurement OperationManual Measurement To stop a Current MeasurementData Transfer Specifications for an adaptable printerData Transmission to a Printer Print sample Steps for data transmissionData Transmission to a Computer Using Analysis Soft Analysis Software and Communication Cables Options and accessoriesCuff sleeves Cuffs and Other AccessoriesCuff cover OthersChecking Accuracy MaintenanceRequired equipment Steps for checking accuracyProblem solving Cleaning the cuff and recorderPeriodical inspection Error code updates without announcement Error codesMaintenance Error Code Memo