Invacare Powered Seating manual Tilt Warning displays

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING

SYMPTOM	PROBABLE CAUSE	SOLUTIONS
Joystick erratic or does not respond	Damaged motor coupling.	Contact Dealer/Invacare for Service.
as desired.
	Electrical malfunction.	Contact Dealer/Invacare for Service.
	Controller programmed	Contact Dealer/Invacare to have
	improperly.	controller reprogrammed.
Wheelchair does not respond to	Poor battery terminal	Have terminals cleaned.
commands.	connection.
Power indicator off - even after	Electrical malfunction.	Contact Dealer/Invacare for Service.
recharging.
TILT WARNING displays and the	The system is tilted or reclined	Return the system to upright position.
wheelchair will not drive.	beyond drive lock-out angle of
	20° (Error code W01).
MAX BACK ANGLE displays.	The wheelchair back has	The wheelchair back will not go past
	reached the maximum	the programmed maximum back angle.
	programmed back angle on a	This is normal behavior.
	wheelchair with a TIAM, RIAM
	or TRAM (Error code W02).
SPM Inhibited displays and the	The system is tilted or reclined	Return the system to the upright
	beyond the drive lock-out angle	position.
wheelchair does not drive.
	of 20° (Error code W03).
SPM Slow Down is displayed and	The elevating seat is elevated	Return elevating seat to the lowest
	(Error code W04).	position to drive at full speed.
the wheelchair drives slowly.

Formula™ Powered Seating 22 Part No 1122170