Invacare Powered Seating manual Footrest Height Adjustment PW93

SECTION 6—FRONT RIGGINGS

70° and PW93

NOTE: For this procedure, refer to FIGURE 6.4.

1.Remove any accessory from the footrest(s).

2.Remove the footrest from the wheelchair. Refer to Installing/Removing Footrests on page 35.

NOTE: Lay the footrest on a flat surface to simplify this procedure.

3.Remove the mounting screw, washers and locknut that secure the lower footrest assembly to the upper footrest support (FIGURE 6.4).

4.Reposition the lower footrest to the desired height.

5.Reinstall the mounting screw, washers and locknut that secure the lower footrest to the footrest support and tighten securely.

6.Repeat STEPS 1-5 for the opposite wheelchair footrest, if necessary.

7.Reinstall the footrest(s) onto the wheelchair. Refer to Installing/ Removing Footrests on page 35.

8.Reinstall any accessory onto the footrest(s).

	Footrest Support
Locknut	Coved
	Washer
Coved	Hex Bolt
Washer
	Lower
	Footrest

FIGURE 6.4 Footrest Height Adjustment -

70° and PW93

70° Taper

NOTE: For this procedure, refer to FIGURE 6.5.

1.Remove any accessory from the footrest(s).

2.Remove the footrest from the wheelchair. Refer to Installing/ Removing Footrests on page 35.

Coved Spacer

Mounting Screw

Heel Loop

Footrest

NOTE: Lay the assembly on a flat surface to
improve access to the hardware.	FIGURE 6.5 Footrest Height Adjustment -
NOTE: Note the position of the spacers before	70° Taper
disassembly.

3.Remove the mounting screw and coved spacer that secures the lower footrest assembly.

4.Position the footrest assembly to the desired height.

5.Secure lower footrest assembly with existing mounting screw and coved spacer. Securely tighten.

Part No 1122170 37 Formula™ Powered Seating