SECTION 7—ARMS
Removing/Installing Reclining Armrests
NOTE: For this procedure, refer to FIGURE 7.3.
Removing Armrests
1. Lift the armrest release lever at the front of the wheelchair to the unlocked (horizontal) position.
2. Lift up on the armrest and remove from the front arm socket.
3. Press the release button at the rear of the armrest in.
4. While holding the release button in, remove the armrest from the seat frame.
Release
Installing Armrests
Button
1. Position the armrest on the seat frame as shown in FIGURE 7.3.
2. | Press the release button at the rear of | Locked |
|
| the armrest in. |
| |
| (DOWN - |
| |
|
|
| |
3. | While holding the release button in, | VERTICAL) | Armrest |
| slide the armrest onto the seat frame. | Unlocked | Release Lever |
4. | Make sure the armrest release lever is | (UP - |
|
|
|
in the unlocked (horizontal) position.
HORIZONTAL)
5. | Install the armrest into the front socket. |
|
6. | Push the armrest release lever down | FIGURE 7.3 Removing/Installing Reclining |
| into the locked (vertical) position. | Armrests |
Part No 1122170 | 55 | Formula™ Powered Seating |