SECTION
Calf Pad Adjustment for Power Center Mount Footrests
NOTE: For this procedure, refer to FIGURE 6.21 on page 50.
NOTE: Ensure footrest height has been adjusted before performing this procedure. Refer to Adjusting the Height of the Center Mount Footrest on page 47.
Depth Adjustment
1.Remove the two depth adjustment screws securing the calf pad mounting bracket to the carriage assembly.
2.Move the calf pad mounting bracket to the desired position.
3.Install the two depth adjustment screws to secure the calf pad mounting bracket to the carriage assembly.
4.Check operation of the calf pads to ensure there is no interference with the seat pan or the carriage assembly. If there is interference, readjust calf pad.
5.Repeat STEPS 1 to 4 for the opposite side, if desired.
Carriage
Assembly
Height/
Width
Adjustment
Screws
Calf Pad
Mounting Bracket
Calf Pad
Depth Adjustment
Screws
FIGURE 6.21 Calf Pad Adjustment for Power Center Mount Footrests
Formula™ Powered Seating | 50 | Part No 1122170 |