SECTION
Adjusting Headrest Height
1.Loosen the set screw on the headrest stop.
2.Loosen, but DO NOT remove, the thumb screw that secures the headrest to the headrest mounting bracket.
3.Position the headrest to the desired height.
4.Tighten the thumb screw that secures the headrest to the headrest mounting bracket.
5.Tighten the set screw on the headrest stop.
6.If necessary, adjust the depth or direction of the headrest. Refer to Adjusting Headrest Depth/Direction on page 61.
Adjusting Headrest Depth/Direction
1.Loosen, but DO NOT remove, the three socket screws that secure the offset fixture to the slide tube.
2.If necessary, reposition the headrest to the desired depth by sliding the headrest towards the front of the wheelchair or towards the rear of the wheelchair.
3.If necessary, reposition the headrest to the desired position (headrest will move in any direction).
4.While holding the headrest in the desired position, securely tighten the three socket screws.
5.If necessary, adjust the height of the headrest. Refer to Adjusting Headrest Height on page 61.
Replacing Headrest
NOTE: For this procedure, refer to FIGURE 9.2.
1.Remove the three socket screws that secure the headrest to the headrest mounting bracket.
2.Position the new headrest on the headrest mounting bracket and secure with the existing three socket screws.
3.If necessary, adjust the height, depth or direction of the headrest. Refer to Adjusting Headrest Height or Adjusting Headrest Depth/Direction on page 61.
NOTE: One style of headrest shown for clarity. Both styles of headrest attach the same way.
Headrest Mounting Bracket
Socket | Headrest | |
Screw | ||
|
FIGURE 9.2 Replacing Headrest
Part No 1122170 | 61 | Formula™ Powered Seating |