Invacare Powered Seating manual Removing/Installing the Center Mount Footrest

SECTION 6—FRONT RIGGINGS

Removing/Installing the Center Mount Footrest

NOTE: For this procedure, refer to FIGURE 6.15 on page 46.

Removing

Power Center Mount Footrests

1.Remove the short quick-release pin that secures the center mount rigging to the link plate (Detail “A”).

2.Remove the rigging pivot pin that secures the center mount rigging to the top of the support (Detail “B”).

3.Remove the long quick-release pin that secures the center mount rigging to the center support (Detail “C”).

NOTE: The link drive tube will fall out when the long quick-release pin is removed. Retain for proper reinstallation.

Manual Center Mount Footrests

1.Remove the rigging pivot pin that secures the footrest to the mounting bracket of the seat frame.

2.Hold the footrest with one hand and engage the release lever with the other while simultaneously pulling the center mount footrest out of the mounting bracket of the seat frame.

Installing

Power Center Mount Footrests

1.Position the link drive tube between the mounting holes of the center support (Detail “C”).

2.Install the long quick-release pin through the mounting holes of the center support, the mounting holes of the center mount footrest and the link drive tube (Detail “C”).

3.Install the rigging pivot pin through the upper mounting holes of the support bracket and the upper mounting tube of the center mount rigging (Detail “B”).

4.Install the short quick-release pin through the link plate and into the center mount footrest (Detail “A”).

5.Ensure all quick-release pins and the rigging pivot pin secure the center mount footrest to the mounting bracket.

Manual Center Mount Footrests

1.Engage the release lever with one hand, hold the center mount footrest with the other, and insert the center mount footrest into the mounting bracket of the seat frame.

Part No 1122170 45 Formula™ Powered Seating