SECTION
Installing/Removing
Footrest Mounting Pin
Footrest Release Lever
Mounting Tube
Adjusting
Coved Washer
Footrest
Hex Screw
FIGURE 4.1 Installing/Removing/Adjusting the Footrests - Swingaway Front Frame
Adjusting 70° MFX and 90° Footrests
NOTE: For this procedure, refer to FIGURE 4.2.
1.Remove any accessories that are attached to the footrests.
2.Remove the socket bolt, coved washer and locknut that secure the footplate to the footrest support.
3.Reposition the footplate to the desired height.
4.Reinstall the socket bolt through the mounting holes of the footplate and footrest support.
CAUTION
DO NOT overtighten socket bolt and locknut. Footrest must be able to rotate upward from the horizontal to the vertical position.
5. Secure the footplate to the footrest support with the coved washer and locknut.
Footrest
Support
Height Adjustment
Holes
Locknut
Socket Bolt
Footplate
FIGURE 4.2 Installing/Removing/Adjusting the Footrests - Adjusting 70° MFX and 90°
Footrests
Part No 1026793 | 29 | Xtra™ |