Invacare 1026793 manual Adjusting T-Arm Transfer Assists and/or Side Guards

SECTION 7—ARMS

Adjusting T-Arm Transfer Assists and/or Side Guards

NOTE: For this procedure, refer to FIGURE 7.10.

1.Remove the T-arm from the wheelchair. Refer to Installing/Removing T-Arms on page 45.

2.Remove the two (2) socket screws that secure the side guard to the bottom clamp.

NOTE: Adjusting the side guards will directly affect the position of the transfer assist.

3.Perform one (1) of the following:

•Small Side Guards - Move the bottom clamp up one (1) of two (2) mounting positions in the side guard.

•Large Side Guards - Move the bottom clamp up one (1) of three (3) mounting positions in the side guard.

4.Re-secure the side guard to the bottom clamp with the two (2) socket screws. Torque to 80-90 in./lbs.

5.Install the T-arm onto the wheelchair. Refer to Installing/Removing T-Arms on page 45.

Slide Guard T-Arm

Transfer Assist

Socket

Bottom Clamp

FIGURE 7.10 Adjusting T-Arm Transfer Assists and/or Side Guards

Xtra™ 50 Part No 1026793