![](/images/new-backgrounds/1294767/294767105x1.webp)
SECTION
Adjusting Quick-Release Axles
NOTE: For this procedure, refer to FIGURE 8.2.
1.Remove rear wheel and
2.Depress detent pin in the
3.Release detent pin ensuring that the locking pins are fully released.
4.Increase or decrease end play by adjusting the locknut on the end of the
WARNING
Make sure the detent pin and locking pins of the
Keep locking pins clean.
5.Reinstall rear wheel onto the wheelchair. Refer to Removing/Installing Rear Wheels on page 51.
Axle Mounting Plate | Locknut |
Locking Pins | Detent Pin |
| |
Wheel Hub |
FIGURE 8.2 Adjusting Quick-Release Axles
Part No 1026793 | 53 | Xtra™ |