SECTION
Rearmost
Mounting Screws
Rear Edge of
Seat
Seat Rail
Seat Positioning
Strap Half
Seat Positioning
Strap Half
NOTE: Only Hook and Loop style seat positioning strap shown. Auto style seat positioning strap attaches the same way.
FIGURE 6.3 Installing/Removing Seat Positioning Strap
Installing Fabric Clothing Guards
NOTE: For this procedure, refer to FIGURE 6.4.
1.Remove the seat cushion, if necessary.
2.Secure the fastening straps of the fabric clothing guards to the fastening straps on the seat upholstery.
3.Reinstall the seat cushion, if necessary.
4.Remove the two (2) phillips screws that secure the back upholstery to the back canes.
Fabric Clothing
Guard
Fastening
Strap
5.Position the
6.Reinstall the two (2) phillips screws. Torque to
7.Run the nylon cord evenly through the two (2)
8.Run the nylon cord through the cord lock.
9.Push star wheel into cord lock to hold the nylon cord in place.
10.Tie a knot in the nylon cord and cut the excess, if desired.
| Seat Upholstery | |
Card Lock |
| |
Phillips Screw | Phillips | |
Screw | ||
| ||
| Star Wheel | |
| Nylon Card |
FIGURE 6.4 Installing Fabric Clothing
Guards
Xtra™ | 40 | Part No 1026793 |